Lifescan Blood Glucose Monitor manual Clean

Page 58

MESSAGE	PROBLEM	WHAT TO DO
CLEAN	1. There is dirt, blood, or lint	1. Clean the test area according to
TEST	on the test area.	instructions.
AREA	2. Your hand or an object cov-	2. Repeat the test. Keep test area
	2. Your hand or an object cov-	2. Repeat the test. Keep test area
	ered the test area during testing.	clear.
	3. The meter was used in very	3. Move the meter away from the
	bright light.	light source. Repeat the test with a
		new test strip.

REMOVE	The test strip was inserted	Remove the strip. Wait for the word
STRIP	before the word INSERT	INSERT before inserting test strip.
	appeared on the display.

100 MG/DL or	If the word CONTRL appears	Repeat the test with a new test strip
5.6 MMOL/L	after a blood test, your blood	and apply a larger drop of blood.
(for example)	sample was too small, smeared,
CONTRL	or another drop was added after
8:01AM 6-01-00	the test began.

57

Image 58

Contents Owner’s Booklet Page Table of Contents Solving Problems Introduction Precautions and Limitations ONE Touch Profile Blood Glucose Meter Page ONE Touch Test Strips Important Test Strip Information Coding the Meter Setting the SystemTurn on the meter Match the Code Numbers Code the MeterCheck Strip Test Insert the check strip Remove the check strip Turn the check strip over and insert it back into the meter Important Check Strip Information Control Solution Test Do a control solution testImportant Control Solution Test Information Use only One Touch Normal Control SolutionInsert a test strip Apply control solution Result appears within 45 seconds Testing Your Blood Detailed Test ProcedureGetting a Drop of Blood Never share a lancet with another personAdjust Puncture Depth Cock the Penlet Plus Sampler Wash Your HandsGet a Drop of Blood Helpful tipsPage Remove the Lancet Cleaning the Penlet Plus Sampler STEP- BY- Step Test Procedure CodeWait Not Enough Blood Retest Apply blood to the test spotRemove the test Strip from the meter Accurate results in 45 seconds Do YOU Event Labelling To select an event label, press the C but Using the Meter Memory Entering the MemoryNodata Recalling ResultsInterm Changing Meter Settings Entering the SET-UP Options ModeOFF OFF Beep Prompts900AM Time and DateEvent Averaging Insulin Prompt Change the insulin typeInsulin Programming Change the insulin units000 Carbohydrate CountingDisplay Language Time Format Date FormatComma Decimal SeparatorExiting the SET-UP Mode Unit of MeasureSolving Problems Test Procedure MessagesSide Check Ketones CALL. DR Test Ketones Error Messages Message Problem What to doClean Error Not Enough Blood Retest Message Problem Redo Taking Care of Your Meter Cleaning the Meter Remove the test strip holder from the meterClean the test area Replace the Test Strip Holder Replacing the Batteries BATTRY` Replace NOW Insert the new AAA batteries into the battery compartment Remove the old batteriesSpecifications Performance CharacteristicsWarranty Five-Year WarrantyInsulin Types Units will Advance on the Display AS Follows1995 IFD/OB/OTP

Related manuals

Manual 89 pages 5.76 Kb