Lifescan Blood Glucose Monitor manual Message Problem

Page 61

MESSAGE	PROBLEM
NOT OK	1. If appearing when you turn
	your meter on, your meter may
	have an electronic problem.
	2. If appearing at the end of a
	test, your meter may have been
	moved while applying blood or
	during the test process.

WHAT TO DO

1.Call your authorized LifeScan representative.

2.Repeat the test, try not to move the meter.

	3. If appearing during the test,	3. Repeat the test with the new
	the strip has been removed at	test strip.
	the WAIT PLEASE screen.

58 MG/DL or	The check strip test result is	Clean the meter and check strip if
3,2 MMOL/L	outside the acceptable range.	necessary.
(for example)		Repeat the test.
✓NOT OK
7:40 AM
6-01-00

60

Image 61

Contents Owner’s Booklet Page Table of Contents Solving Problems Introduction Precautions and Limitations ONE Touch Profile Blood Glucose Meter Page ONE Touch Test Strips Important Test Strip Information Coding the Meter Setting the SystemTurn on the meter Code the Meter Match the Code NumbersCheck Strip Test Insert the check strip Remove the check strip Turn the check strip over and insert it back into the meter Important Check Strip Information Do a control solution test Control Solution TestUse only One Touch Normal Control Solution Important Control Solution Test InformationInsert a test strip Apply control solution Result appears within 45 seconds Detailed Test Procedure Testing Your BloodNever share a lancet with another person Getting a Drop of BloodAdjust Puncture Depth Wash Your Hands Cock the Penlet Plus SamplerHelpful tips Get a Drop of BloodPage Remove the Lancet Cleaning the Penlet Plus Sampler Code STEP- BY- Step Test ProcedureWait Apply blood to the test spot Not Enough Blood RetestRemove the test Strip from the meter Accurate results in 45 seconds Do YOU Event Labelling To select an event label, press the C but Entering the Memory Using the Meter MemoryRecalling Results NodataInterm Entering the SET-UP Options Mode Changing Meter SettingsOFF Beep Prompts OFFTime and Date 900AMEvent Averaging Change the insulin type Insulin PromptChange the insulin units Insulin ProgrammingCarbohydrate Counting 000Display Language Date Format Time FormatDecimal Separator CommaUnit of Measure Exiting the SET-UP ModeTest Procedure Messages Solving ProblemsSide Check Ketones CALL. DR Test Ketones Message Problem What to do Error MessagesClean Error Not Enough Blood Retest Message Problem Redo Taking Care of Your Meter Remove the test strip holder from the meter Cleaning the MeterClean the test area Replace the Test Strip Holder Replacing the Batteries BATTRY` Replace NOW Remove the old batteries Insert the new AAA batteries into the battery compartmentPerformance Characteristics SpecificationsFive-Year Warranty WarrantyUnits will Advance on the Display AS Follows Insulin Types1995 IFD/OB/OTP

Related manuals

Manual 89 pages 5.76 Kb