Lifescan Blood Glucose Monitor manual

Page 8

On/off button. This button turns the meter on and off.

Display. This is where you read the simple messages that guide you through test- ing, setting options, and using the memory. Your test results will be dis- played here.

MButton. The One Touch™ Profile™ Meter automatically stores your test results. Use the M button to recall the information stored in your meter’s memory and to review your meter’s set-up options.

C Button. Use the C button to set the code on the One Touch Profile Meter and to change the meter’s set-up options.

Test strip holder. The test strip holder holds a One Touch™ Test Strip in place when you perform a blood glucose or control solution test.

Test area. The test area is located under the test strip holder.

Battery compartment. Holds two AAA batteries. The batteries are already installed in your meter.

Data port. Allows you to transfer the infor- mation stored in the meter’s memory to a computer to view, analyse, and print. Please call your authorized LifeScan representative for more information about our Diabetes Management System software.

7

Image 8

Contents Owner’s Booklet Page Table of Contents Solving Problems Introduction Precautions and Limitations ONE Touch Profile Blood Glucose Meter Page ONE Touch Test Strips Important Test Strip Information Turn on the meter Setting the SystemCoding the Meter Match the Code Numbers Code the MeterCheck Strip Test Insert the check strip Remove the check strip Turn the check strip over and insert it back into the meter Important Check Strip Information Control Solution Test Do a control solution testImportant Control Solution Test Information Use only One Touch Normal Control SolutionInsert a test strip Apply control solution Result appears within 45 seconds Testing Your Blood Detailed Test ProcedureGetting a Drop of Blood Never share a lancet with another personAdjust Puncture Depth Cock the Penlet Plus Sampler Wash Your HandsGet a Drop of Blood Helpful tipsPage Remove the Lancet Cleaning the Penlet Plus Sampler STEP- BY- Step Test Procedure CodeWait Not Enough Blood Retest Apply blood to the test spotRemove the test Strip from the meter Accurate results in 45 seconds Do YOU Event Labelling To select an event label, press the C but Using the Meter Memory Entering the MemoryNodata Recalling ResultsInterm Changing Meter Settings Entering the SET-UP Options ModeOFF OFF Beep Prompts900AM Time and DateEvent Averaging Insulin Prompt Change the insulin typeInsulin Programming Change the insulin units000 Carbohydrate CountingDisplay Language Time Format Date FormatComma Decimal SeparatorExiting the SET-UP Mode Unit of MeasureSolving Problems Test Procedure MessagesSide Check Ketones CALL. DR Test Ketones Error Messages Message Problem What to doClean Error Not Enough Blood Retest Message Problem Redo Taking Care of Your Meter Cleaning the Meter Remove the test strip holder from the meterClean the test area Replace the Test Strip Holder Replacing the Batteries BATTRY` Replace NOW Insert the new AAA batteries into the battery compartment Remove the old batteriesSpecifications Performance CharacteristicsWarranty Five-Year WarrantyInsulin Types Units will Advance on the Display AS Follows1995 IFD/OB/OTP

Related manuals

Manual 89 pages 5.76 Kb