Lifescan Blood Glucose Monitor manual Insulin Programming, Change the insulin units

Page 47

00UNITS

Step 2: Change the insulin units.

When the units area is flashing ‘00’, press

the C button
the C button	00	UNITS		45	UNITS
until your	00			45
insulin dose	INTERM			INTERM
is displayed.	M-MOVE C-CHANGE			M-MOVE C-CHANGE
is displayed.

Press the M button again and follow the same steps to enter your second type of insulin and

INSULIN PROGRAMMING

If you want to enter several insulin records at a time, or if you forgot to enter your insulin information after a test, use the insulin programming option in the meter set-up.

In the set-up mode, use the M button to choose the insulin programming option. Press the C button; the insulin type will flash. Continue pressing the C button until

the dose.

INSULN SHORT

SECOND TYPE

M-MOVE C-CHANGE

your insulin type is displayed. Press the M button to move to the units area. Use the C button to enter your insulin units. In the same way, pressing the M button will allow you to move to the hour, minutes, year, month, and day to complete your insulin record. Use the C button to change the information in each area.

46

Image 47

Contents Owner’s Booklet Page Table of Contents Solving Problems Introduction Precautions and Limitations ONE Touch Profile Blood Glucose Meter Page ONE Touch Test Strips Important Test Strip Information Turn on the meter Setting the SystemCoding the Meter Code the Meter Match the Code NumbersCheck Strip Test Insert the check strip Remove the check strip Turn the check strip over and insert it back into the meter Important Check Strip Information Do a control solution test Control Solution TestUse only One Touch Normal Control Solution Important Control Solution Test InformationInsert a test strip Apply control solution Result appears within 45 seconds Detailed Test Procedure Testing Your BloodNever share a lancet with another person Getting a Drop of BloodAdjust Puncture Depth Wash Your Hands Cock the Penlet Plus SamplerHelpful tips Get a Drop of BloodPage Remove the Lancet Cleaning the Penlet Plus Sampler Code STEP- BY- Step Test ProcedureWait Apply blood to the test spot Not Enough Blood RetestRemove the test Strip from the meter Accurate results in 45 seconds Do YOU Event Labelling To select an event label, press the C but Entering the Memory Using the Meter MemoryRecalling Results NodataInterm Entering the SET-UP Options Mode Changing Meter SettingsOFF Beep Prompts OFFTime and Date 900AMEvent Averaging Change the insulin type Insulin PromptChange the insulin units Insulin ProgrammingCarbohydrate Counting 000Display Language Date Format Time FormatDecimal Separator CommaUnit of Measure Exiting the SET-UP ModeTest Procedure Messages Solving ProblemsSide Check Ketones CALL. DR Test Ketones Message Problem What to do Error MessagesClean Error Not Enough Blood Retest Message Problem Redo Taking Care of Your Meter Remove the test strip holder from the meter Cleaning the MeterClean the test area Replace the Test Strip Holder Replacing the Batteries BATTRY` Replace NOW Remove the old batteries Insert the new AAA batteries into the battery compartmentPerformance Characteristics SpecificationsFive-Year Warranty WarrantyUnits will Advance on the Display AS Follows Insulin Types1995 IFD/OB/OTP

Related manuals

Manual 89 pages 5.76 Kb