Important Product Information (cont.)
Electrical Requirements
The installation must have a Class A
An equipment grounding terminal is provided in the ®eld wiring compartment. To reduce the risk of electrical shock, this terminal must be connected to the grounding means provided in the electrical supply panel with a conductor equivalent in size to the circuit conductors supplying this equipment.
Install this unit in accordance with the Canadian Electric code, Part I. |
|
Table of Contents |
|
Important Information | 2 |
Important Product Information | 2 |
Product Notices | 2 |
Product Inspection | 2 |
2 | |
Connections and Service Access | 2 |
Electrical Requirements | 3 |
Thank You For Choosing Kohler Company | 4 |
Recommended Tools and Materials | 4 |
Introduction | 4 |
Before You Begin | 4 |
List of New Terms | 5 |
Roughing In Information | 7 |
Construct the Stud Framing | 7 |
Install the Rough Plumbing | 7 |
Prepare the Unit | 7 |
Position the Unit | 8 |
Install the Plumbing | 8 |
Make the Electrical Connections | 9 |
Test Run the Bath | 9 |
Check the Connections and Fill the Unit | 9 |
Test the Control Switch | 9 |
Complete the Finished Wall or Deck | 11 |
Install the Faucet Trim | 11 |
11 | |
Using Your Bath | 12 |
Fill the Bath | 12 |
Operating Sequence | 12 |
Chromatherapy Light Operation | 13 |
Kohler Co. | 3 |