Jacuzzi U961000 manual Wall Alcove Installation English

Page 16

Espree™ Bathtub Series

3-Wall Alcove Installation

English

XX Install the drain/overflow according to the manufacturer’s instructions. Refer also to the Technical Specifications section.

Watertight installation of the drain is the installer’s responsibility. Drain leakage is excluded from the Jacuzzi Luxury Bath warranty of this product.

YY Install the faucet at this time. It is recommended that the faucet be installed by a qualified plumber.

ZZ Install the flange (purchased separately) according to the instructions that are included with the kit. If the bathtub is equipped with an integrated flange, skip this step.

[[ Place the bathtub into the niche. Screw the flange to the wood stud. It may be necessary to shim the unit to close up any gaps between the wood stud and the flange.

\\ Insulation may be placed within the bathtub surround. ]] Turn off the power supply to the GFCI protected

circuit.

^^ Align the bathtub and connect the drain.

__ Connect flex water supply lines to faucet and plug power cords into GFCI outlet.

`` Inspect all fittings, plumbing, and control lines after inserting the bathtub to insure the components are not damaged, disconnected, or contacting the finish surface substrate or support members.

aa Turn on the power supply to the dedicated GFCI protected circuits and check system operation.

Complete all finish work around the perimeter of bathtub to seal the space between the rim and the finished deck.

 

Cement Board

 

Mortar

 

Finishing

 

Material

 

Plastic Filler

 

Silicon/Sealant

Screw

Bath Rim

 

Tile Flange

 

Stud Wall

 

1˝ x 4˝ (not for

 

support)

Tile

Stud Wall

Cement Board

Tile Adhesive

Caulking

Mounting

Screw

Tile Flange

Stud

1˝ x 4˝ (not for support)

Skirt Installation

Bathtubs with an Integral Skirt

XX Screw skirt flanges into wall studs.

It may be necessary to shim the unit to close any gaps between wall studs and the flanges.

YY Complete finish work over skirt flange.

ZZ Caulk around the perimeter of the skirt to seal the space between the skirt and the finished deck.

Finishing

Materials

Green Board

Caulking Bead

Rim of Bathtub

Stud

Skirt Panel

Floor

Page 16

www.jacuzzi.com

Installation and Operation

Image 16
Contents Espree Bathtub Series English Contents English Product InformationSafety Instructions Read and Follow ALL INSTRUCTIONS. Save These InstructionsSafety Instructions Operational Safety Instructions Risk of hyperthermia and possible drowningOperational Safety Instructions Introduction English Optional Tile Flange KITUndermount Installation Options Typical Flange Mounting DetailInspection and Testing Visual Inspection Bathtub Water and Operational TestFraming and Support SubfloorElectrical Connections English Pump/MotorElectrical Connection 6060 w/Heater Initial Start-UpDrop-in Installation Drop-in Installation con’t ` `Wall Alcove Installation English Skirt Installation Bathtubs with an Integral SkirtEnglish Operation CleanupON/OFF Button Rapdheat Operation Whirlpool ControlEnglish Maintenance Suction Cover/Strainer MaintenancePurging the Whirlpool System Bathtub AdditivesTroubleshooting Procedures Problem Probable Causes RemedyBaths Without Integral SKIRT, 542BM Specifications Corner Right Hand and Left Hand Specifications CornerRoughing-In Reference Espree 6032 with SKIRT, RH Espree 6042 with SKIRT, RHEnglish Roughing-In Reference 14 xCut Outs English Authorized Service SPECIFICATION/SERIAL Number LabelJacuzzi Luxury Bath EnglishEspañol Responsibilities of Others