Graham Field LF1031FP Handling Procedures, Shipping and Transportation Instructions, Unpacking

Page 7

4HANDLING PROCEDURES

SHIPPING AND TRANSPORTATION INSTRUCTIONS

If the patient lift is to be reshipped by common carrier, it should be packed in the same carton in which it was received.

Unpacking

1.Check for any obvious damage to the carton or its contents. If damage is evident, notify the car- rier or your authorized Lumex Dealer.

2.Remove all loose packing from the carton.

3.Carefully remove all the components from the carton.

Info: Unless the patient lift is to be used immediately, retain boxes, containers and packing material for use in storing until use of patient lift is required.

Inspection

1.Examine the exterior of the patient lift for nicks, dents, scratches or other damage.

2.Inspect all components.

Storage

1.Store the repackaged patient lift in a dry area.

2.DO NOT place other objects on top of the repackaged patient lift.

1031FP-INS-LAB-RevA11

7

Image 7
Contents LF1031FP Hydraulic Patient Lift With Foot Pedal Contents Introduction Safety Precautions 1031FP-INS-LAB-RevA11 Features Inspection Handling ProceduresShipping and Transportation Instructions UnpackingComponents Assembly InstructionsAssembly Install push handles Install spreader bar Lowering the patient onto a bed Operating InstructionsLifting the Patient Lifting the patient from a bedLowering the patient to the floor Lifting the patient from the floorRemoving the sling Before Each USE Care and MaintenanceLubrication Checking for Damage and Wear CleaningCare of Slings Removal of Existing Pump Installation of 1010S005 Hydraulic PumpInstallation of New Pump Maintenance Schedule Symptom Possible Cause Action TroubleshootingSpecifications Limited Warranty GF Health Products, Inc. Graham-Field Index