Barco MGD 221 MKII user manual Appendix B Technical Specifications, AR panel 30%

Page 35

APPENDIX B:

TECHNICAL SPECIFICATIONS

Picture tube:

Faceplate transmission:

No Panel: +/- 34%

AR panel: 30%

Faceplate type: AR panel or No Panel

Image representation: portrait

Phosphor: B4-L8

Light output:

Calibrated: 215 Cd/m²

Resolution:

Max. adress. pixels:1280

Max. adress. lines: 1600

Scanning systems

Horizontal scanning:

Multi sync: ￿-controller controlled VGA boot range: 30-35 kHz

Normal operation range: 80- 140 kHz

Minimum blanking : 2.4 ￿s

Storable scan frequencies: 4

Prealigned scans: 1

Vertical scanning:

Minimum frequency: 48 Hz

Maximum frequency: 150 Hz

Minimum blanking: 250 ￿s (after leading edge)

Geometry

Nominal size (4/3 ratio): 300mm x 400mm

Nominal size (4/5 ratio): 304mm x 380mm

Inputs

Video

BNC connectors 75 Ohm

Nominal level: 0.7 Vpp

Sync

BNC connectors 75 Ohm

Nominal level: 0.5 Vpp

Communication inputs/outputs RS232 9-pin sub D connector Baudrate: 9600

Power supply:

Voltage: 100 - 240 V +/- 10%

Frequency: 50/60 Hz

Current: 2.3 A

Environmental

Temperature range (°C):

Storage: -20/+65

Operation: 0/+45

Within specs: 15/+30

Altitude: storage: 25 000 ft

operational: 10 000 ft Humidity (relative): 95 % max., non condensing

Weight: (No Panel version)

 

UnpackedPacked

 

37.4 kg

55.9 kg

Dimensions packing:

H x W x D: 788mm x 630mm x 780mm

Dimensions monitor (mm):

Height: 558

Width: 400

Depth: 561

Modifications reserved.

Technical specifications

36

Image 35
Contents Medical Greyscale Display MGD 221 MkiiTrademark information MGD 221 Users Guide Safety Instructions MGD 221 Users Guide Contents MGD 221 Users Guide Overview IntroductionAbout the manuals Power saving systemVersions and options Package contents InstallationPrecautions Controls and connectors Connection of video signals Signal connectionConnection of optical sensor Connection of data signalsPositioning the display Connection of powerImportant considerations Operation User Controls Switching on / offPower on/off Automatic power saving system DpmsTo put contrast in calibrated position Contrast and brightness controlTo activate the OSD To control brightness manually To control contrast manuallyTo put brightness in calibrated position Explanation of the Status information menu items Viewing Status informationTo view the status information Activity timeout Other adjustmentsTo change the settings Advanced Settings and Adjustments For Service Staff onlySettings Saving the settings Explanation of the Settings menu itemsGeometry Rotation AdjustmentsHow to make the adjustments Description of the adjustmentsAdvanced SH Compensation SH Compensation ON/OFF Interlacing Pre correctionInterlacing Post correction SH Compensation optionalSH Compensation SH Position Advanced Advanced ALC optional To adjust the ALC system, proceed as followsFocus Static focus Focus zoneWhat happens upon saving? Factory resetHow to save changes Proceed as follows Luminance uniformityCabinet MaintenancePicture tube There appears no image, the green LED is blinking TroubleshootingThere appears no image, the green LED is on Luminance Uniformity Correction Appendix a Background InformationPage AR panel 30% Appendix B Technical Specifications