Barco MGD 221 MKII user manual Safety Instructions

Page 4

SAFETY INSTRUCTIONS

Regulations

This apparatus conforms to: IEC601-1, UL2601-1, cUL2601-1, EN 60601-1

This apparatus is classified as Type B without Applied Part.

Usage in Hazardous locations

Class I equipment

Equipment not suitable for use in the presence of a flammable anaesthetic mixture with air or with oxygen or nitrous oxyde.

FCC notice

This equipment has been tested and found to comply with the limits of a class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated inacommercialenvironment.Thisequipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the userwillberequiredtocorrecttheinterference at his own expense.

Power connection

Power cord: Utilise a UL-listed detachable power cord, 3-wire, type SJ or equivalent, 18 AWG min., rated 300 V min., provided with a hospital-grade type plug 5-15P configuration for 120V application, or 6-15P for 240V application.

Warning: This apparatus must be earthed!

Power requirements: connect the apparatus

Read the safety and operating instructions before operating the apparatus.

Retain safety and operating instructions for future reference.

Adhere to all warnings on the apparatus and in the operating instructions manual.

Follow all instructions for operation and use.

to an AC voltage as indicated at its back. Using a lower voltage, the apparatus will not be able to operate. Using a higher voltage may damage the apparatus.

If you are not sure of the type of power supplied, consult the power company.

Do not overload wall outlets and extension cords as this may result in fire or electric shock.

Mains lead protection (U.S.: Power cord): Supply cords should be routed so that they are not likely to be walked upon or pinched by items placed upon or against them, paying particular attention to cords at plugs and receptacles.

Water and moisture

Never expose the apparatus to rain or moisture.

Never use the apparatus near water - e.g. near a bathtub, washbasin, swimming pool, kitchensink,laundrytuborinawetbasement.

Ventilation

Donotcoverorblocktheventilationopenings in the cover of the set. When installing the apparatus in a cupboard or another closed location, heed the necessary space between the set and the sides of the cupboard.

Installation

Place the apparatus on a flat, solid and stable surface that can bear the weight of at least 3 monitors. If you use an unstable cart or stand, the set may fall, causing serious injury to a child or adult, and serious damage to the equipment.

More warnings in the Installation chapter.

MGD 221 User's Guide 5

Image 4
Contents MGD 221 Mkii Medical Greyscale DisplayTrademark information MGD 221 Users Guide Safety Instructions MGD 221 Users Guide Contents MGD 221 Users Guide Introduction OverviewVersions and options Power saving systemAbout the manuals Precautions InstallationPackage contents Controls and connectors Signal connection Connection of video signalsConnection of data signals Connection of optical sensorConnection of power Positioning the displayImportant considerations Switching on / off Power on/offAutomatic power saving system Dpms Operation User ControlsTo activate the OSD Contrast and brightness controlTo put contrast in calibrated position To put brightness in calibrated position To control contrast manuallyTo control brightness manually To view the status information Viewing Status informationExplanation of the Status information menu items Other adjustments Activity timeoutSettings Advanced Settings and Adjustments For Service Staff onlyTo change the settings Explanation of the Settings menu items Saving the settingsAdjustments How to make the adjustmentsDescription of the adjustments Geometry RotationAdvanced Interlacing Pre correction Interlacing Post correctionSH Compensation optional SH Compensation SH Compensation ON/OFFSH Compensation SH Position Advanced Advanced To adjust the ALC system, proceed as follows Focus Static focusFocus zone ALC optionalFactory reset How to save changes Proceed as followsLuminance uniformity What happens upon saving?Picture tube MaintenanceCabinet There appears no image, the green LED is on TroubleshootingThere appears no image, the green LED is blinking Appendix a Background Information Luminance Uniformity CorrectionPage Appendix B Technical Specifications AR panel 30%