Health O Meter 2450KL operation manual User Settings

Page 16

OPERATION INSTRUCTIONS

03UI Test

The scale has a diagnostic routine where it tests the User Interface (UI) hardware functionality (LCD, keypad). In order to do this the user has to press all the keys according to the messages displayed on the screen.

If the requested command was not received or wrong button was pressed, the following message will be displayed.

If after 10 seconds the requested command was not received, the following message will be displayed. If “UI Error Failure” is displayed, refer to qualified service personnel.

07USER SETTINGS

01Retain Entered Values

This option allows the user to use the same values for ID, height and TARE between weighing. If this option is disabled, the user has to re-enter these values for each reading. If the values are not entered, only the weight is stored.

NOTE: These values cannot be retained by ID number.

15

Page 15 Page 17
Image 16
Page 15 Page 17
Contents PRO Plustm Portable Wheelchair Scale Table of Contents Scale Specifications SpecificationsGeneral SET UP Scale Opening and Assembly InstructionsSET UP Preparing the Scale for Use Replacing BatteriesOperation Instructions Description Function Menu Weight Display ModeOnly applies to pound values, not the metric values Tare Weight Data ManagementAutomatic Tare Removing the TareEnter Scale Settings Operation Instructions System Settings System Test User Settings Operation Instructions Maintenance MaintenanceCleaning Disconnect the scale from the AC power sourceTroubleshooting Symptom Possible Cause Corrective ActionCalibration Path Operator Action DisplayExploded View of Scale continue Parts List Description QtyWarranty Limited WarrantyWhat does the Warranty Cover? To get Warranty Service
Top Page Image Contents