5 SCAN OPERATION
■Weather channel scan
(U.S.A. version only)
qPush , then push [ENT•WX] to select a weather chan- nel.
wSet squelch to the point where noise is just muted.
e Push , then push [ANL•SCAN] to start the scan.
•When a signal is received, the scan pauses until it disappears.
•To change the scanning direction, rotate [DIAL].
rTo stop the scan, push [CLR•DEL].
■“TAG” channel setting
Memory and weather channels* can be specified to be skipped for the memory and weather channel* scans respec- tively. The “TAG” channel function is only available during scan operation.
Push then
Appears the “TAG” indicator. |
|
Memory channel 15 is | Memory channel 15 is |
scanned during memory | skipped during scan. |
scan. |
|
qPush [MR•MW] to select memory mode; or, push , then
push [ENT•WX] to select a weather channel.*
wSelect the desired memory channel to be a “TAG” chan- nel.
ePush , then push [9•TAG] to set a “TAG.”
•“TAG” appears.
•
rTo cancel the “TAG” setting, repeat above steps.
*Weather channel: U.S.A. version only.
17