Icom IC-A6 SPECIFICATIONS

SPECIFICATIONS

DGeneral

•Frequency coverage (MHz): TX 118.000 to 136.975

RX 108.000 to 136.975*1

WX 161.650 to 163.275*2

*1:IC-A24 only, IC-A6; 118.000 to 136.975 MHz

*2:U.S.A. version only.

•Mode : 6K00A3E

16K0G3E (161.65 to 163.275 MHz)

•Channel spacing : 25 kHz

•Number of memory channels : 200 (20 CH. ×10 BANK)

•Power supply requirement : Speciﬁed battery packs/case or

11.0 V DC at external DC jack

•Usable temp. range : –10˚C to +60˚C (+14°F to +140°F)

•Current drain :

Tx 1.5 Atypical

Rx 70 mAtypical (at stand by)

300 mAtypical. (at AF max.)

•Antenna connector : BNC 50 Ω(nominal)

•Dimensions : 54(W)×129.3(H)×35.5(D) mm

(projections not incl.)

21⁄8(W)×53⁄32(H) ×113⁄32(D) inch

•Weight : Approx. 180 g(6.35 oz)

(Without the battery pack and antenna.)

DTransmitter

•Output power : 5 W (PEP) typical

1.5 W (CW) typical

•Modulation : Low level modulation

•Modulation limiting : 70 to 100%

•Audio harmonic distortion :

Less than 10% (at60 % mod.)

•Hum and noise ratio : More than 35 dB

•Spurious emissions : More than 46 dB (except oper-

ating frequency ±6.25 Hz range)

•Microphone connector : 3-conductor 2.5(d) mm (1/10˝)/

more than 100 kΩ

DReceiver

•Receive system : Double conversion

superheterodyne

•Intermediate frequencies : 1st 30.05 MHz

2nd 450 kHz

•Sensitivity

VOR (AM 6dB S/N)

: Less than –3 dBµ typical

COM (AM 6dB S/N)

: Less than –6 dBµ typical

WX (FM 12dB SINAD)

: Less than –13 dBµ typical

•Squelch sensitivity : AM Less than 0 dBµ

FM Less than –7 dBµ

•Selectivity : More than 7.5 kHz/–6 dB)

Less than 25 kHz/–60 dB)

��Spurious response : AM More than 60 dB

rejection FM More than 30 dB

•Audio output power : More than 500 mW typical

(at 10% distortion with an 8 Ω

load, 30% mod.)

•Noise and hum : More than 40 dB at 30% mod.

•External SPconnector : 3-conductor 3.5 (d) mm

(1/8˝)/8 Ω

All stated specifications are subject to change without

notice or obligation.