Icom IC-A6 instruction manual 4DC Power Jack, DC Power Connection

1 PANEL DESCRIPTION

!1CLEAR KEY [CLR•DEL] (pgs. 8–17)

➥ Push to turn to the frequency mode, when mem- ory channel, WX channel, 121.5 MHz, squelch level setting or beep tone setting is selected.

➥Push , then push and hold [CLR•DEL] to delete a recall frequency data.

➥Push to clear the entered comment of memory name while programming.

➥Push to stop the scan function to turn to the fre- quency mode while the scan function is operat- ing.

!2ANL KEY [ANL•SCAN] (pgs. 9, 16, 17)

➥ Push to turn the ANL function ON or OFF.

➥Push , then push [ANL•SCAN] to start the scan function.

!3EMERGENCY KEY [121.5 MHz] (p. 11)

Push for 2 sec. to select the 121.5 MHz emergency frequency.

!4DC POWER JACK

Connect the AC adapter or optional cable to charge the battery pack or to operate by external power supply. (see right illustration)

!5MEMORY MODE KEY [MR•MW] (pgs. 12–15)

➥ Push to call the memory channel mode.

➥Push , then push [MR•MW] to program the contents into the memory channels.

!6ENTER KEY [ENT•WX] (pgs. 8, 14)

➥ Push to enter the numeral input. Enters con- secutive zero digits. (p. 8)

➥Push , then push [ENT•WX] to enter the weather channel selection mode (U.S.A. version only). (p. 8)

➥Push to program the memory name. (p. 14)

NOTE: Some functions may not be available depending on versions. Ask your authorized dealer for details.

•DC POWER CONNECTION

IC-A24/A6	CP-20 (for 11 24 V)
	(optional)

To the cigarette lighter socket

To [DC 11V]

Wall charger

3