Icom IC-A6 - page 11

6

1

PANELDESCRIPTION

1

iTAG CHANNELINDICATOR (p. 17)

“” appears when the memory channel is set as a TAG

channel.

oMEMORYCHANNEL INDICATOR (pgs. 12–15)

Shows the memory channel number.

!0MEMORY BANK NUMBER INDICATOR (p. 12)

Shows the selected memory bank number.

!1OVERFLOW INDICATOR (IC-A24 only) (pgs. 18–22)

Appears when the deviation between the desired course

and ﬂying course is over 10 degrees.

!2ANL INDICATOR (p. 9)

Appears while the ANL(Automatic Noise Limiter) function

is in use.

!3COURSE DEVIATION NEEDLES (IC-A24 only)

(pgs. 18–22)

Indicates the deviation between the desired course and

your actual ﬂying course every 2 degrees.

!4COURSE INDICATORS (IC-A24 only) (p. 19)

➥Indicates where your aircraft is located on a VOR radial

in DVOR mode.

➥Indicates where your desired course is located on a

VOR radial in CDI mode.

!5TO-FROM INDICATOR (IC-A24 only) (p. 19)

Indicates whether the VOR navigation information is

based on a course leading to the VOR station or leading

away from the VOR station.

Contents

Main i SAFETY TRAINING INFORMATION CAUTION WARNING Electromagnetic Interference/Compatibility Occupational/Controlled Use FOREWORD IMPORTANT EXPLICIT DEFINITIONS READ ALL INSTRUCTIONS SAVE THIS INSTRUCTION MANUALThis in- PRECAUTION R WARNING! NEVER NEVER DO NOT AVOID TABLE OF CONTENTS iv 1 Panel description Page Page Page 1 Function display Page 2 BASIC OPERATION Setting a frequency Using keypad Using the tuning dial Setting a squelch level 3 Receiving Transmitting ANL function Low battery indicator Recall function DCalling the stored frequencies DDeletes the stored recall channel DReplaces the stored recall channel 3 Setting weather alert function Accessing 121.5 MHz emergency frequency Lock function Side tone function MEMORY OPERATION Memory channel selection Transferring memory contents 4 Programming a memory channel Memory names Programming memory names Clearing the memory contents Page SCAN OPERATION Scan types COM band scan Memory scan 5 Weather channel scan TAG channel setting VOR NAVIGATION (IC-A24 ONLY) VOR indicators 6 VOR functions DTo select the CDI mode DTo select the DVOR mode DTOor FROMag selection Flying to a VOR station 21 6 Desired course Aircraft heading 40 THE AIRCRAFT IS ON COURSE Aircraft should be heading 40 Aircraft heading 46 (6 off course) Flown course Entering a desired course Crosschecking position 23 6 CROSSCHECKING POSITION 113.4 Ch 81 OLM EXAMPLE: Entering the desired course bearing 65to a VOR station. OLYMPIA Duplex operation DProgramming a duplex frequency DOperating the duplex function 7 Battery charging DRecycling information (U.S.A. only) Battery cautions CAUTION! NEVER Optional battery case 27 7 Optional battery chargers DRapid charging with the BC-119N+AD-101 DRapid charging with the BC-121N+AD-101 CLONING DTransceiver to transceiver cloning DCloning using PC DCloning error 9 SPECIFICATIONS DGeneral DTransmitter DReceiver 31 11 DBATTERYCASE AND PACKS DCHARGERS DBELT CLIPS DDC CABLES QUICK REFERENCE 12 r MEMORY OPERATION (p. 13) MEMORY OPERATION (p. 12) Transferring memory contents OPTIONAL HEADSET CONNECTION DOPC-499 (HEADSETADAPTER) connection