Icom IC-A6 instruction manual Quick Reference, IA24/A6

32

q Cutw Fold e Complete Importantoperating instructions are summed up in this and the following page foryour simple reference. Bycutting along the line and folding on the dotted line, it will become a card sized operating guide which can easily be carried in a card case or wallet, etc. QUICK REFERENCE 12

<CUT HERE>

n

OPERATION GUIDE

iA24/A6

VOR NAVIGATION (p. 22)

Entering a desired course.

qPush keypad or rotate [DIAL] to set the frequency for the de- sired VOR station.

Push , then push [2 TO] or [3 FROM] to change the to- from flag.

w Push , then push [4 CDI] to select CDI mode.

'Ω' or ' ≈' appears on the func- tion display when your aircraft is off the desired course.

When your heading is correct, the ABSS function may be useful instead of course input.

VOR NAVIGATION (p. 20)

Flying to a VOR station

qSelect a VOR station on your aero- nautical chart and push the keypad or rotate [DIAL] to set the station's frequency.

wSelect the 'TO' flag when flying to the VOR station, or select the 'FROM' flag when flying away from the VOR station.

Push , then push [2 TO] to se- lect 'TO'.

Push , then push [3 FROM] to select 'FROM'.

ePush , then push [4 CDI] to se- lect the CDI mode.

The course indicator shows 'OF' when the desired VOR signal can not be received.

VOR NAVIGATION

nFlying to a VOR station (Continued)

rThe course deviation needle ap- pears when your aircraft is off course from the VOR station.

tPush , then push [1 DVOR] to exit the CDI mode.

SCAN (pgs. 16, 17)

qPush [CLR DEL], [MR MW] or , then [ENTWX]* to select the fre-

quency, memory or WX CH* mode.

wPush , then push [ANL SCAN] to start scanning.

Decimal point blinks during scan- ning.

Rotate [DIAL] to change the scan- ning direction.

ePush [CLRDEL] to cancel the scan- ning.