Icom IC-A6 Memory Operation, Memory channel selection, Transferring memory contents

MEMORY OPERATION 4

■Memory channel selection

The transceiver has 200 memory channels for storage of often-used frequencies along with 6-character notes.

■Transferring memory contents

This function transfers a memory channel’s contents into the

3

qPush [MR•MW] to select memory mode.

•Memory BANK number and memory CH. number appears.

Using [DIAL]:

w Push [0•BANK], then rotate [DIAL] to select the desired memory BANK number, then push [0•BANK] (or [CLR•DEL]) to exit the BANK selection mode.

•“BANK” appears.

eRotate [DIAL] to select the desired memory CH. number.

•If no memory CH. is programmed in the selected BANK, no memory CH. selection is available.

Using the Keypad:

wPush [0•BANK], then push appropriate digit key ([0•BANK] to [9•TAG]) to select the desired memory BANK number, then push [0•BANK] (or [CLR•DEL]) to exit the BANK-se- lection mode.

•“BANK” appears.

ePush 2 appropriate digit key (00 to 19) to select the de- sired memory CH. number.

•If no memory CH. is programmed in the selected BANK, no memory CH. selection is available.

NOTE: Comments appear first when programmed, how- ever, the transceiver can be programmed by your dealer to show the operating frequency first. Push [MR•MW] to dis- play the comment in this case.

frequency mode. This is useful when searching for signals 4 around a memory channel’s frequency.

qPush [MR•MW] to select memory mode.

wSelect the desired memory channel to be transferred using [DIAL] or keypad.

ePush , then push [MR•MW] to transfer the memory channel’s contents into the frequency mode.

•BANK number and memory CH. number disappears as frequency mode is automatically selected and the mem- ory contents are transferred.

Memory mode Frequency mode

12