Icom IC-A6 instruction manual Quick Reference

12 QUICK REFERENCE

33

MEMORY OPERATION (p. 13)

Memory programming

qPush [CLRDEL] to select the fre-

quency mode or push , then push [ENTWX] to select WX CH* mode.

wSelect the desired frequency or WX CH.*

ePush , then push [MRMW] to enter memory programming mode. “M”, BANK and memory numbers blink on the display.

rRotate [DIAL] (or push keypad) to select a desired memory CH num- ber (0 to 19).

Push [0 BANK], then select the BANK number if desired. Push [0 BANK] to exit the BANK selec- tion mode.

tPush [ENT WX] to program the

memory contents.

MEMORY OPERATION (p. 12)

Transferring memory contents

qPush [MR MW] to enter memory mode.

wSelect the desired channel to be transferred.

ePush , then push [MR MW].

BANK number and memory CH number disappears as frequency mode is automatically selected and the memory contents are transferred.

nLOCK FUNCTION (p. 9)

q Push	,Then push [7	] to turn
the key lock function ON.
“	” appears on the display.

wPush ,Then push [7 ] to turn the keylock function OFF.

MEMORY OPERATION (p. 12)

Memory BANK/CH selection

qPush [MR•MW] to enter the mem- ory CH mode.

wPush , then push [0BANK] to enter the BANK selection mode.

ePush keypad (or rotate [DIAL]) to select the desired BANK number (BANK 0 to 9).

Push , then push [0 BANK] (or push [ENTWX]) to set the BANK

number and exit the BANK selec- tion mode.

Push [CLR DEL] to exit the BANK selection mode.

nTAG CHANNELS (p. 17)

qPush [MR MW] to select the mem- ory mode.

wPush , then [9 TAG] to turn the channel “TAG” ON and OFF.

*WX CH available U.S.A. version only.