![](/images/new-backgrounds/1308852/30885257x1.webp)
FWD WHEELCHAIRS | PROCEDURE 10 |
5.HIGH BACK CAPTAIN'S SEATS ONLY
FOLDING.
1.HIGH BACK CAPTAIN'S SEATS ONLY
Refer to INSTALLING/ | Refer to INSTALLING/RE- | |
MOVING FOOTRESTS or | ||
REMOVINGBATTERY | ||
INSTALLING/REMOVING | ||
BOXESinthisprocedure | ||
of the manual. | ELEVATING LEGRESTS | |
| in PROCEDURE 3 of this | |
| manual. |
2.Remove the Captain's Seat. Refer to REMOVING/ INSTALLING CAPTAIN'S SEATin this procedure of the manual.
3.Removetheshrouds.RefertoREMOVING/INSTALL- ING SHROUDS in this procedure of the manual.
4.Remove the batteries and footrests/legrests from the wheelchair. Refer to FIGURE 2.
ADJUSTING/REPLACING TELESCOPING FRONT RIGGING SUPPORT (FIGURE 3)
1.Lift up on the crossbraces until they release from the
2.Remove the phillips bolt and locknut that secure the front
3.Remove the two (2) locknuts and socket bolts that secure telescoping front rigging support to wheelchair.
4.If necessary, remove the hex bolt and locknut that secures the battery charger connector bracket to the wheelchair.
Adjusting
1.Position the telescoping front rigging support to the desired depth.
Phillips Bolt |
|
FRONT SOCKET | |
| BOLT |
Front Socket Bolt | POSITIONS (IN |
| INCHES DEEP): |
Socket Bolt | 16 |
| 18 and |
| 17 |
F
W D
W H E E L C H A I R S
CAUTION
HIGHBACKCAPTAIN'S SEATS ONLY - Discon- nect limit switch BE- FORE removing seat - damage to seat can occur.
Refer to DISCONNECT-
ING/CONNECTING LIMIT SWITCH in this procedure of the manual.
Refer to BATTERY TRAY in this procedure of the manual.
Push Brackets
Crossbraces
Wheelchair
Frame
Locknuts |
|
DO NOT USE WITH FRONT | Telescoping Front |
SOCKET BOLT | Rigging Support |
Hex Bolt |
|
and Locknut |
|
Battery
Charger
Bracket
FIGURE 2 - TRANSPORTING EXCEL -
CAPTAIN'S SEATS
FIGURE 3 - ADJUSTING/REPLACING TELESCOPING FRONT RIGGING SUPPORT
29