Invacare Wheelchair manual Extension, Handle Rubber Tip If Equipped, Motor Set Screw

PROCEDURE 11 RWD WHEELCHAIRS

R

W

D

W

H

E

E

L

C H A I R S

INSTALLING OPTIONAL CLUTCH EXTENSION HANDLES (FIGURE 11)

1.Turn the power to the wheelchair to the OFF position.

2.Position the clutch extension handle by the clutch handle on the motor as shown in FIGURE 11.

NOTE: If the clutch handle on the motor is equipped with a rubber tip, remove the rubber tip before installing the clutch extension handle.

3. Slideclutchextensionhandleonto motor clutchhandle.

NOTE: If necessary, lightly tap the clutch extension handle onto the clutch handle with a plastic mallet. Make sure the vertical portions of both handles are in line.

4.Securely tighten set screw on clutch extension handle.

5.Repeat STEPS 2-4for opposite side of wheelchair.

Clutch
Extension	Remove
Handle	Rubber Tip
	if Equipped
	Clutch
	Handle
Motor

Set Screw

NOTE: Make sure vertical portions of both handles are in line.

FIGURE 11 - INSTALLING OPTIONAL CLUTCH

EXTENSION HANDLES

44