Invacare 1163197 manual Installing Crutch and Cane Carrier

Page 48

SECTION 11—OPTIONS

Installing Crutch and Cane Carrier

WARNING

Check base weekly to ensure proper placement.

When loading the crutch/cane carrier, ensure items are securely placed into the base. Also ensure that there is no interference with folding the wheelchair, the rear wheels, or the swing-back arms.

Strap MUST be securely fastened while carrying items. NEVER insert or remove items while wheelchair is moving.

NOTE: For this procedure, refer to FIGURE 11.8.

1.Slide the clamp with the base attached over the end of the step tube of the wheelchair. Ensure the base is towards the inside of the wheelchair.

2.Position the base parallel to the step tube.

CAUTION

Base should be parallel to step tube to avoid bending spokes when folding the wheelchair.

3.Securely tighten the locknut that secures the base to the step tube of the wheelchair.

4.Remove the upper back upholstery screw and washer.

5.Align the strap with the back upholstery screw mounting hole.

6.Reinstall the back upholstery screw and washer and secure the strap to the wheelchair.

7.The base cleans easily with any chrome or glass cleaner. The strap can be cleaned with mild soap and water.

Strap

Base

Clamp

Step Tube

FIGURE 11.8 Installing Crutch and Cane Carrier

Installing/Removing the Seat Positioning Strap

Installing

NOTE: For this procedure, refer to FIGURE 11.9 on page 49.

NOTE: Right and left is determined by sitting in the wheelchair.

1.Remove the mounting screw and locknut that secure the back angle bracket to the wheelchair.

2.Secure the buckle strap to the back angle bracket on the right side of the wheelchair with mounting screw and locknut. Tighten securely.

3.Secure the tongue strap to the back angle bracket on the left side of the wheelchair with mounting screw and locknut. Tighten securely.

Removing

1.Remove the mounting screw and locknut that secures the buckle strap to the back angle bracket.

2.Remove the buckle strap.

3.Secure the back angle bracket to the wheelchair frame with the mounting screw and locknut. Tighten securely.

4.Remove the mounting screw and locknut that secures the tongue strap to the back angle bracket.

5.Remove the tongue strap.

6.Secure the back angle bracket to the wheelchair frame with the mounting screw and locknut. Tighten securely.

Insignia™

48

Part No. 1163197

Page 47 Page 49
Image 48
Page 47 Page 49
Contents Insignia Insignia Table of Contents Wheel Locks Special Notes Wheelchair TIE-DOWN Restraints and Seat Positioning StrapsLabel Location Typical Product Parameters InsigniaWeight Training/Weight Limitation General GuidelinesStability All Models Anti-TippersOperating Information General Guidelines SAFETY/HANDLING of Wheelchairs Safety/Handling of WheelchairsStability and Balance Coping With Everyday ObstaclesReaching, Leaning and Bending Forward Reaching, Leaning BackwardsTipping Method 1 Wheelchair With Step TubesStairways StairwaysEscalators Transferring To and From Other SeatsUnfolding and Folding Wheelchair Folding Hammock or Sling Seat Models Safety INSPECTION/TROUBLESHOOTING Safety Inspection ChecklistTroubleshooting Inspect/Adjust MonthlyMaintenance Installing/Removing Front Riggings Assembly Front RiggingsAdjusting Footplate Height Raising/Lowering Elevating Legrest AssemblyReplacing Heel Loop Replacing Heel LoopRemoving/Installing the Armrest Adjusting Armrest HeightArms Using Flip Back Armrest Removing/Installing the Flip Back ArmRemoving/Installing the Flip Back Arm Replacing Clothing GuardsPosition for Desk Length Removing/Installing the Seat Upholstery Removing/Installing the Seat CushionSeat and Back Removing/Installing the Back Upholstery Removing/Installing the Seat CushionAdjusting Back Height, Back Angle or Seat Depth Adjusting Seat WidthRemoving/Installing Rear Wheels Rear WheelsAdjusting Quick-Release Axle Removing/Installing Rear Wheels RemovingReplacing/Repairing Rear Wheel Tire Replacing Rear Wheel HandrimRemoving/Installing Front Casters Removing/Installing the Caster/Fork/Headtube AssemblyFront Casters Removing/Installing the Caster/Fork/Headtube Assembly Replacing/Repairing Front Caster Tire/Tube Adjusting Front Caster MountingUsing Patient Operated Wheel Locks Wheel LocksAdjusting Patient-Operated Wheel Locks Installing/Adjusting Anti-tippers ANTI-TIPPERSInstalling Anti-Tippers Changing Orientation of Anti-Tip WheelsAdjusting Anti-Tippers Installing/Removing the I.V. Holder Adjusting the Height of the I.V. HolderOptions Installing/Removing the O2 Holder Installing/Removing the O2 Holder Using the O2 Holder Cleaning the O2 HolderInstalling/Removing the IV/O2 Holder Bottom View of IV/O2 Holder with ANTI-TIPPER InstalledUsing the IV/O2 Holder Detail C Detail D Bottom ViewAdjusting the Height of the IV Pole Cleaning the IV/O2 HolderInstalling Crutch and Cane Carrier Installing/Removing the Seat Positioning StrapInstalling/Removing the Seat Positioning Strap Options Limited Warranty USA

1163197 specifications

The Invacare 1163197 is a standout product in the realm of mobility aids, specifically designed to enhance the quality of life for individuals with limited mobility. This model integrates advanced technology and user-friendly features that provide both comfort and safety.

One of the main characteristics of the Invacare 1163197 is its robust construction. Built to withstand daily use, the frame is crafted from durable materials ensuring longevity and stability. The design incorporates a lightweight aluminum structure, making it easy to maneuver while maintaining strength. The weight capacity of the unit is impressive, accommodating users up to a certain threshold.

Comfort is paramount in the design of the Invacare 1163197. The seat is padded with high-density foam, providing exceptional support and cushioning. Furthermore, the seat height is adjustable, allowing users to find their ideal position for both comfort and accessibility. This feature is particularly beneficial for individuals who may require the aid of caregivers or family members to assist with transfers.

The Invacare 1163197 also excels in terms of mobility and maneuverability. It is equipped with large swivel wheels that facilitate easy navigation over various terrains, whether indoors or outdoors. The front wheels can pivot 360 degrees, allowing for tight turns and improved control, making it suitable for crowded spaces or narrow hallways.

Safety features are a highlight of this mobility aid. The model includes reliable braking systems, providing users with a sense of security while stationary. Handgrips are ergonomically designed, reducing strain on the hands and allowing for easy operation when moving the chair.

In addition to its physical attributes, the Invacare 1163197 is designed with portability in mind. It can be easily folded for transport or storage, making it ideal for travel. The streamlined design ensures that it can fit into most vehicles with ease.

Finally, the aesthetic appeal of the Invacare 1163197 should not be overlooked. The sleek design, combined with a variety of color options, allows users to choose a model that reflects their personal style while also fulfilling their mobility needs.

In summary, the Invacare 1163197 is a well-rounded mobility aid that emphasizes comfort, safety, and practicality, making it an excellent choice for those seeking to enhance their independence and mobility.
Top Page Image Contents