Invacare 1163197 manual Troubleshooting, Inspect/Adjust Monthly

Page 18

SECTION 3—SAFETY INSPECTION/TROUBLESHOOTING

❑Ensure all spokes are uniformly tight.

❑Inspect axle assembly for proper tension by spinning caster. Caster should come to a gradual stop.

❑Inspect front caster for cracked, bent or broken spokes.

Inspect/Adjust Monthly

❑Ensure that the wheelchair rolls straight (no excessive drag or pull to one side).

❑Check that the wheel locks DO NOT interfere with tires when rolling.

❑Check that the wheel lock pivot points are free of wear and looseness.

❑Inspect seat and back for loose or broken hardware.

❑Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify hardware that attaches strap to frame is secure and undamaged. Replace if necessary.

❑Inspect back cane hand grips for wear/looseness/deterioration.

❑Adjust front casters/forks bearing system if wheel wobbles noticeably or binds to a stop.

❑Ensure wheel bearings are clean and free of moisture.

❑Check headtube locknuts for tightness.

Inspect/Adjust Periodically

❑Inspect frame and crossbraces for loose or missing hardware.

❑Inspect for bent frame or crossbraces.

❑Check that wheel locks are easy to engage.

❑Inspect seat and backs for rips and sagging.

❑Check that there is no excessive side movement or binding in the rear wheels when lifted and spun.

❑Inspect handrims for signs of rough edges or peeling.

❑Adjust front casters/forks bearing system if wheel wobbles noticeably or binds to a stop.

❑Inspect casters for cracks and wear.

❑Ensure that casters are free of debris.

❑Ensure wheel bearings are clean and free of moisture.

❑Clean upholstery and armrests.

❑Check that all labels are present and legible. Replace if necessary.

Troubleshooting

Chair Veers

Chair 3

Sluggish Turn or

Casters

Squeaks and

Looseness in

Solutions

Right/Left

Wheels

Performance

Flutter

Rattles

Chair

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Check for loose nuts

 

 

X

X

X

X

and bolts.

 

 

 

 

 

 

 

 

 

 

 

 

 

Check caster headtube

X

X

 

X

 

 

angle.

 

 

 

 

 

 

 

 

 

 

 

 

 

Check that rear

 

 

 

 

 

 

wheels are equally

 

 

 

 

 

 

spaced away from seat

X

X

 

 

 

 

frame.

 

 

 

 

 

 

 

Insignia™

18

Part No. 1163197

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Insignia Insignia Table of Contents Wheel Locks Special Notes Wheelchair TIE-DOWN Restraints and Seat Positioning StrapsLabel Location Typical Product Parameters InsigniaStability All Models Weight Training/Weight LimitationGeneral Guidelines Anti-TippersOperating Information General Guidelines Stability and Balance SAFETY/HANDLING of WheelchairsSafety/Handling of Wheelchairs Coping With Everyday ObstaclesReaching, Leaning and Bending Forward Reaching, Leaning BackwardsTipping Method 1 Wheelchair With Step TubesStairways StairwaysEscalators Transferring To and From Other SeatsUnfolding and Folding Wheelchair Folding Hammock or Sling Seat Models Safety INSPECTION/TROUBLESHOOTING Safety Inspection ChecklistTroubleshooting Inspect/Adjust MonthlyMaintenance Installing/Removing Front Riggings Assembly Front RiggingsAdjusting Footplate Height Raising/Lowering Elevating Legrest AssemblyReplacing Heel Loop Replacing Heel LoopRemoving/Installing the Armrest Adjusting Armrest HeightArms Using Flip Back Armrest Removing/Installing the Flip Back ArmRemoving/Installing the Flip Back Arm Replacing Clothing GuardsPosition for Desk Length Removing/Installing the Seat Upholstery Removing/Installing the Seat CushionSeat and Back Removing/Installing the Back Upholstery Removing/Installing the Seat CushionAdjusting Back Height, Back Angle or Seat Depth Adjusting Seat WidthRemoving/Installing Rear Wheels Rear WheelsAdjusting Quick-Release Axle Removing/Installing Rear Wheels RemovingReplacing/Repairing Rear Wheel Tire Replacing Rear Wheel HandrimRemoving/Installing Front Casters Removing/Installing the Caster/Fork/Headtube AssemblyFront Casters Removing/Installing the Caster/Fork/Headtube Assembly Replacing/Repairing Front Caster Tire/Tube Adjusting Front Caster MountingUsing Patient Operated Wheel Locks Wheel LocksAdjusting Patient-Operated Wheel Locks Installing/Adjusting Anti-tippers ANTI-TIPPERSInstalling Anti-Tippers Changing Orientation of Anti-Tip WheelsAdjusting Anti-Tippers Installing/Removing the I.V. Holder Adjusting the Height of the I.V. HolderOptions Installing/Removing the O2 Holder Installing/Removing the O2 Holder Using the O2 Holder Cleaning the O2 HolderInstalling/Removing the IV/O2 Holder Bottom View of IV/O2 Holder with ANTI-TIPPER InstalledUsing the IV/O2 Holder Detail C Detail D Bottom ViewAdjusting the Height of the IV Pole Cleaning the IV/O2 HolderInstalling Crutch and Cane Carrier Installing/Removing the Seat Positioning StrapInstalling/Removing the Seat Positioning Strap Options Limited Warranty USA

1163197 specifications

The Invacare 1163197 is a standout product in the realm of mobility aids, specifically designed to enhance the quality of life for individuals with limited mobility. This model integrates advanced technology and user-friendly features that provide both comfort and safety.

One of the main characteristics of the Invacare 1163197 is its robust construction. Built to withstand daily use, the frame is crafted from durable materials ensuring longevity and stability. The design incorporates a lightweight aluminum structure, making it easy to maneuver while maintaining strength. The weight capacity of the unit is impressive, accommodating users up to a certain threshold.

Comfort is paramount in the design of the Invacare 1163197. The seat is padded with high-density foam, providing exceptional support and cushioning. Furthermore, the seat height is adjustable, allowing users to find their ideal position for both comfort and accessibility. This feature is particularly beneficial for individuals who may require the aid of caregivers or family members to assist with transfers.

The Invacare 1163197 also excels in terms of mobility and maneuverability. It is equipped with large swivel wheels that facilitate easy navigation over various terrains, whether indoors or outdoors. The front wheels can pivot 360 degrees, allowing for tight turns and improved control, making it suitable for crowded spaces or narrow hallways.

Safety features are a highlight of this mobility aid. The model includes reliable braking systems, providing users with a sense of security while stationary. Handgrips are ergonomically designed, reducing strain on the hands and allowing for easy operation when moving the chair.

In addition to its physical attributes, the Invacare 1163197 is designed with portability in mind. It can be easily folded for transport or storage, making it ideal for travel. The streamlined design ensures that it can fit into most vehicles with ease.

Finally, the aesthetic appeal of the Invacare 1163197 should not be overlooked. The sleek design, combined with a variety of color options, allows users to choose a model that reflects their personal style while also fulfilling their mobility needs.

In summary, the Invacare 1163197 is a well-rounded mobility aid that emphasizes comfort, safety, and practicality, making it an excellent choice for those seeking to enhance their independence and mobility.
Top Page Image Contents