Cisco Systems 78-16845-01 manual Changing the Service-Level Passwords Using the CLI

Page 16

Chapter 3 Building the Network

3.5.1 Prerequisites for Adding NEs

where ro is the SNMP get community string and rw is the SNMP set only community string.

Step 3 Enter the following command to configure the SNMP get community string:

xxyyzz% cnfsnmp community public ro

xxyyzz%

Step 4 Enter the following command to check that the community string has changed:

dspsnmp

You will see output similar to the following example:

xxyyzz.7.PXM.a > dspsnmp

xxyyzz System Rev: 05.00 Dec. 14, 2004 20:04:14 GMT

MGX8850 Node Alarm: MAJOR

Community (rw): private

Community (ro): public

System Location: building 3 System Contact:

To change the SNMP set community strings for a node or switch:

Note The following procedure changes the SNMP set community string for the node that you SSH or Telnet to, not for all instances of that node. You must change the SNMP set community string on all instances of the node.

Step 1 Open a terminal window and SSH or Telnet to the switch.

Step 2 Enter the cnfsnmp command to change the SNMP set community string for all nodes as follows:

xxyyzz% cnfsnmp community private rw xxyyzz%

Step 3 Enter the following command to check that the community string has changed:

dspsnmp

You will see output similar to the following example:

xxyyzz.7.PXM.a > dspsnmp

xxyyzz System Rev: 05.00 Dec. 14, 2004 20:04:14 GMT

MGX8850 Node Alarm: MAJOR

Community (rw): private

Community (ro): public

System Location: building 3 System Contact:

3.5.1.8.5 Changing the Service-Level Passwords Using the CLI

To change the service-level password for the current service-level user:

Note The following procedure changes the service-level password for the node that you SSH or Telnet to, not for all instances of that node. You must change the service-level password on all instances of the node.

Cisco Transport Manager Release 6.0 User Guide

3-16	78-16845-01

Image 16

Contents Building the Network OverviewHow Do I Build Groups? Adding GroupsCopying Groups Field DescriptionDeleting Groups Moving GroupsDeleting a Single Group Adding Network Partitions How Do I Build Network Partitions?Deleting Multiple Groups Modifying Network Partitions Deleting Network PartitionsHow Do I Build Subnetworks? Adding SubnetworksMoving Subnetworks How Do I Build NEs?Deleting Subnetworks Prerequisites for Adding ONS 15216 EDFA2 or EDFA3 NEs Prerequisites for Adding NEsPrerequisites for Adding ONS 15302 and ONS 15305 NEs Building the Network Prerequisites for Adding NEs Hostnames and IP Addresses Required An Efficient Network Topology Setup Prerequisites for Adding ONS 1580x NEs Prerequisites for Adding Cisco CRS-1 and XR 12000 NEsPrerequisites for Adding Cisco Catalyst 6509 NEs Prerequisites for Adding Cisco MGX Voice Gateway DevicesSetting Up Nonstandard Community Strings Option DescriptionChanging the Service-Level Passwords Using the CLI Adding NEs Adding a Single NENE ID Adding Multiple NEs NE ID- Read-onlyField Descriptions for the Add New NE Wizard NE Properties Panel Not selectable if Automatic subnetwork Grouping is enabled Copying an NE from One Group to Another Moving an NE from One Group to AnotherMoving an NE from One Network Partition to Another Automatically Grouping NEs in SubnetworksDeleting NEs Deleting a Single NEDeleting Multiple NEs Removing a Deleted NE Restoring a Deleted NE How Do I Build Links?Searching for an NE Overview of Supported Links ONS 15454 Sonet NE Model NE Card Physical LayerOPT-BST ONS 15600 Sonet Viewing the Link Table File10describes the fields in Link table Field Description Filtering the Link Table Filtering Links in the Network MapCreating Links Building the Network Creating Links 12 Field Descriptions for the Create Link Wizard Field Descriptions for the Create Link Wizard Field Modifying LinksLink Type Link Validity Link Color 14 Field Descriptions for the Modify Link Wizard Deleting Links Viewing Link UtilizationFiltering the Link Utilization Table Column DescriptionCustomizing a Network Map How Do I Use Network Maps?Payload Type Description Click UI Properties Adjusting the Zoom Level or Pan Position Viewing a Node in the Network MapModifying a Node Icon Modifying a Node Icon or a Map Background ImageModifying a Map Background Saving Changes to the Network Map Discovering ONS 155xx NEs Discovering CTC-Based NEsDiscovery Information Table Rediscovering ONS 155xx, CRS-1, and XR 12000 NEs Time stampResetting the Resync Interval How Do I Discover the Network for MGX Voice Gateway Devices? Discovering NEs Message Quality DescriptionSetting Up External or Line Timing for CTC-Based Sonet NEs Building the Network Setting Up Internal Timing for CTC-Based Sonet NEs Bits 1 OUTOOS Setting Up External or Line Timing for CTC-Based SDH NEs Unframed , FAS , FAS + CAS Bits 1 OUT Setting Up Internal Timing for CTC-Based SDH NEs Viewing Clocking Sources Displaying the List of Available Clock Sources Configuring Global ClockingDisplaying the List of Manual Clock Sources Creating a Manual Clock Source How Do I Test Connectivity for Optical and Routing Devices?Method Description How Do I Test Connectivity for MGX Voice Gateway Devices? Testing NE ConnectivityPinging an NE Cisco Transport Manager Release 6.0 User Guide 78-16845-01

Related manuals

Manual 138 pages 47.51 Kb