Cisco Systems 78-16845-01 manual Adding Multiple NEs, NE ID- Read-only

Page 19

Chapter 3 Building the Network

3.5.2 Adding NEs

Step 10 Verify that the NE software version is listed in the Supported NE table (Domain Explorer > Administration > Supported NE Table). If it is not listed, see 4.3.7 Adding a New NE Software Version to the CTM Domain, page 4-37.

3.5.2.2 Adding Multiple NEs

Note Table 3-7describes the fields in the Add New NE wizard.

Step 1 Select a node in the Domain Explorer or Subnetwork Explorer tree; then, choose File > Add Network Element(s) (or click the Add Network Element(s) tool). The Add New NE wizard opens.

Note You cannot add a new NE to the Discovered Network Elements or Deleted Network Elements group.

Step 2 Enter the following information:

a.NE model

b.NE type

c.NE addition—Click the Bulk NE Addition radio button.

Note Bulk NE addition does not apply to passive ONS 15216 NEs or Not Managed/Other Vendor NEs.

d. IP address range—Enter the IP addresses in the From and To fields; then, click Add.

Note The IP addresses must be from the same subnetwork.

e. IP address selection—Add or remove IP addresses using the Add and Remove buttons.

Step 3 Click Next.

Note If you click Finish in this window, Cisco default values will be assigned to the remaining fields.

Step 4 Enter the following information. Fields shown depend on the NE type.

a.NE ID— Read-only

b.Operational state

c.SNMP community string

d.SNMP set only community string

e.NE service level username

f.NE service level password

g.Description

Cisco Transport Manager Release 6.0 User Guide

	78-16845-01	3-19

Image 19

Contents Overview Building the NetworkField Description How Do I Build Groups?Adding Groups Copying GroupsDeleting Groups Moving GroupsDeleting a Single Group Adding Network Partitions How Do I Build Network Partitions?Deleting Multiple Groups Deleting Network Partitions Modifying Network PartitionsAdding Subnetworks How Do I Build Subnetworks?Moving Subnetworks How Do I Build NEs?Deleting Subnetworks Prerequisites for Adding ONS 15216 EDFA2 or EDFA3 NEs Prerequisites for Adding NEsPrerequisites for Adding ONS 15302 and ONS 15305 NEs Building the Network Prerequisites for Adding NEs Hostnames and IP Addresses Required An Efficient Network Topology Setup Prerequisites for Adding Cisco CRS-1 and XR 12000 NEs Prerequisites for Adding ONS 1580x NEsPrerequisites for Adding Cisco MGX Voice Gateway Devices Prerequisites for Adding Cisco Catalyst 6509 NEsOption Description Setting Up Nonstandard Community StringsChanging the Service-Level Passwords Using the CLI Adding a Single NE Adding NEsNE ID NE ID- Read-only Adding Multiple NEsField Descriptions for the Add New NE Wizard NE Properties Panel Not selectable if Automatic subnetwork Grouping is enabled Moving an NE from One Group to Another Copying an NE from One Group to AnotherAutomatically Grouping NEs in Subnetworks Moving an NE from One Network Partition to AnotherDeleting a Single NE Deleting NEsDeleting Multiple NEs Removing a Deleted NE Restoring a Deleted NE How Do I Build Links?Searching for an NE Overview of Supported Links ONS 15454 Sonet Layer NE Model NE Card PhysicalOPT-BST ONS 15600 Sonet File Viewing the Link Table10describes the fields in Link table Field Description Filtering Links in the Network Map Filtering the Link TableCreating Links Building the Network Creating Links 12 Field Descriptions for the Create Link Wizard Field Descriptions for the Create Link Wizard Field Modifying LinksLink Type Link Validity Link Color 14 Field Descriptions for the Modify Link Wizard Viewing Link Utilization Deleting LinksColumn Description Filtering the Link Utilization TableCustomizing a Network Map How Do I Use Network Maps?Payload Type Description Click UI Properties Viewing a Node in the Network Map Adjusting the Zoom Level or Pan PositionModifying a Node Icon Modifying a Node Icon or a Map Background ImageModifying a Map Background Saving Changes to the Network Map Discovering ONS 155xx NEs Discovering CTC-Based NEsDiscovery Information Table Time stamp Rediscovering ONS 155xx, CRS-1, and XR 12000 NEsResetting the Resync Interval How Do I Discover the Network for MGX Voice Gateway Devices? Message Quality Description Discovering NEsSetting Up External or Line Timing for CTC-Based Sonet NEs Building the Network Bits 1 OUT Setting Up Internal Timing for CTC-Based Sonet NEsOOS Setting Up External or Line Timing for CTC-Based SDH NEs Unframed , FAS , FAS + CAS Bits 1 OUT Setting Up Internal Timing for CTC-Based SDH NEs Viewing Clocking Sources Displaying the List of Available Clock Sources Configuring Global ClockingDisplaying the List of Manual Clock Sources Creating a Manual Clock Source How Do I Test Connectivity for Optical and Routing Devices?Method Description How Do I Test Connectivity for MGX Voice Gateway Devices? Testing NE ConnectivityPinging an NE Cisco Transport Manager Release 6.0 User Guide 78-16845-01

Related manuals

Manual 138 pages 47.51 Kb