M
UP
O
Lift Operating Instructions
To Load Passenger:
1.Load passenger onto platform
facing outward and lock wheel- chair brakes.
Note: Outer barrier must be fully unfolded (ramp position) until the entire wheelchair has crossed the roll stop. See Photos K and L.
2.Press red UP switch until platform stops (reaches floor level). Re- lease switch. See Photo S.
Switch Arm: Slide knob out to UP position.
Note: Outer barrier must be UP and barrier latch must be fully engaged before raising platform. Platform will raise above ground level approximately three inches before latch engages fully.
N
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| approximately 3˝ | P |
|
|
|
|
|
| |
|
|
|
|
|
|
Page 33