Leica M125 B, M165 C B user manual General Notes, Use in clean rooms, Cleaning, Servicing

Page 4

General Notes

Use in clean rooms

The Leica M series can be used in clean rooms without any problems.

Cleaning

★★ Do not use any unsuitable cleaning agents, chemicals or techniques for cleaning.

★★ Never use chemicals to clean colored surfaces or accessories with rubberized parts. This could damage the surfaces, and products could be contaminated by abraded particles.

★★ In most cases, we can provide special solu- tions on request. Some products can be modified, and we can offer other accesso- ries for use in clean rooms.

★★ The cleaning of glass surfaces and objec- tives in particular should be carried out exclusively as outlined in the brochure "Cleaning of Microscope Optics". The infor- mation can be downloaded at: http://www.leica-microsystems.com/prod- ucts/

. Select your product and go to the "Down- load" page.

★★ For additional information, refer to page 56.

Servicing

★★ Repairs may only be carried out by Leica Microsystems-trained service technicians. Only original Leica Microsystems spare parts may be used.

Responsibilities of person in charge of instrument

★★ Ensure that the Leica stereomicroscope is operated, maintained and repaired by authorized and trained personnel only.

Leica M series	User Manual	4

Image 4

Contents Living up to Life Copyright Risks arising from, using the microscope for Leica M125 B nameplateUse in clean rooms CleaningGeneral Notes ServicingImportant Safety Notes Symbols Used Important informationDisposal Explanatory notesSafety Instructions DescriptionIntended use of instrument Non-intended useRepairs, service work Only original Leica Microsystems spare parts may be usedTransport Integration in third-party productsLegal regulations EC Declaration of ConformityHealth risks Careful handlingColumn External power supply for the focusingLeica M165 C B Contents Different Types of Objectives Care, Maintenance, Contact PersonsLeica TL5000 Ergo Transmitted Light Base Leica M Series Congratulations Step Towards Infinity Fewer cables Maximum Compatibility ObjectivesAll new objectives of the Leica M series are parfocal TubesOn We Go Assembly Base and Focusing Column Assembling the column adapter Assembling the focusing driveTools used Allen key, 3 mmOptics carrier Tools used Assembling the Optics CarrierAllen key, 4 mm Place the optics carrier on the focus GrooveTube Tools usedNo tools required PreparationsTools used Preparation EyepiecesMagnification range Preparation ObjectiveAttaching the objective Unpacking the base Focusing drive and column Bottom using the 4 Allen screwsTL5000 Ergo transmitted light base Base is delivered with the adapter plateWiring Connections Leica M165 C B New Leica M series features extensiveTerminal for the 50-watt power supply provided LaterCables Cable Duct Feeding the cablesQuick Start Guide Fastest Route to Success Overview of an M Series Microscope Adjusting the interpupillary distance Correct interpupillary distanceReference values Look into the eyepiecesUsing the Eyepieces Dioptric CorrectionIf you do not wear glasses If you wear glassesFocusing Focusing drive can be operated either left- or right-handedFocusing Coarse/fine adjustmentAdjusting the Resistance of the Focus Drive Adjusting the resistanceZooming Changing the Magnification ZoomLook into the eyepieces Focus on the specimen Enabling and disabling click stops Click Stops and MagnificationsMagnifications and fields of view Parfocality More Comfort and Convenience for Your Work Requirements for parfocal workParfocality Enlarge the view to the maximum level Focus on the specimenClosing the iris diaphragm Iris DiaphragmOpening the Iris Diaphragm Eyepieces Magnification Factor of the Eyepieces Following eyepieces are available for the M seriesHealth Notes Potential sources of infectionUsing the Dioptric Correction Dioptric CorrectionAdjusting Dioptric Correction and ParfocalityGraticules UseObjectives Optical Accessories Different Types of Objectives Achromatic objectivesPlanachromatic objective 1× Achromatic objectives with a long focal lengthBases Leica TL5000 Ergo Transmitted Light Base Controls Control for the size of the aperture/ balanceLeica TL5000 Ergo Transmitted Light Base Operation Switching the transmitted light base onOff Leica TL5000 Ergo Transmitted Light Base Operation Technical Data Power supply Leica TL5000 Ergo Transmitted Light BaseLight source ConnectionsAppendix Example ParameterCalculation example magnification in the binocular tube Warranty benefits Care, Maintenance, Contact PersonsCare Keep accessories in a dust-free place when not in use Cleaning polymer componentsProtection from dirt Dust and dirt will affect the quality of your results