Leica M165 C B, M125 B user manual Leica TL5000 Ergo Transmitted Light Base Operation, Off

Page 49

Leica TL5000 Ergo Transmitted Light Base: Operation

The transmitted light base must only be

Switching the transmitted light base on

 

connected to a grounded socket with a

and off

2. Press the on/off switch on the right side

faultless power cable! Failure to observe these

1. Switch on the transmitted light base with

once to turn on the illumination.

warnings may result in serious personal injury

the power switch on the rear side.

 

or even death!

 

 

The LED illumination can be very bright!

 

 

• Check and adjust the intensity of the

 

 

illumination to a suitable brightness before

 

 

looking through the eyepieces.

 

 

Continued on next page.

Leica M series

User Manual

49

 

 

 

Page 48 Page 50
Image 49
Page 48 Page 50
Contents Living up to Life Copyright Leica M125 B nameplate Risks arising from, using the microscope forCleaning Use in clean roomsGeneral Notes ServicingImportant Safety Notes Important information Symbols UsedDisposal Explanatory notesDescription Safety InstructionsIntended use of instrument Non-intended useOnly original Leica Microsystems spare parts may be used Repairs, service workTransport Integration in third-party productsEC Declaration of Conformity Legal regulationsHealth risks Careful handlingColumn External power supply for the focusingLeica M165 C B Contents Different Types of Objectives Care, Maintenance, Contact PersonsLeica TL5000 Ergo Transmitted Light Base Leica M Series Congratulations Step Towards Infinity Fewer cables Objectives Maximum CompatibilityAll new objectives of the Leica M series are parfocal TubesOn We Go Assembly Assembling the column adapter Assembling the focusing drive Base and Focusing ColumnTools used Allen key, 3 mmTools used Assembling the Optics Carrier Optics carrierAllen key, 4 mm Place the optics carrier on the focus GrooveTools used TubeNo tools required PreparationsTools used Preparation EyepiecesMagnification range Preparation ObjectiveAttaching the objective Bottom using the 4 Allen screws Unpacking the base Focusing drive and columnTL5000 Ergo transmitted light base Base is delivered with the adapter plateNew Leica M series features extensive Wiring Connections Leica M165 C BTerminal for the 50-watt power supply provided LaterFeeding the cables Cables Cable DuctQuick Start Guide Fastest Route to Success Overview of an M Series Microscope Correct interpupillary distance Adjusting the interpupillary distanceReference values Look into the eyepiecesDioptric Correction Using the EyepiecesIf you do not wear glasses If you wear glassesFocusing drive can be operated either left- or right-handed FocusingFocusing Coarse/fine adjustmentAdjusting the resistance Adjusting the Resistance of the Focus DriveZooming Changing the Magnification ZoomLook into the eyepieces Focus on the specimen Enabling and disabling click stops Click Stops and MagnificationsMagnifications and fields of view Requirements for parfocal work Parfocality More Comfort and Convenience for Your WorkParfocality Enlarge the view to the maximum level Focus on the specimenClosing the iris diaphragm Iris DiaphragmOpening the Iris Diaphragm Eyepieces Following eyepieces are available for the M series Magnification Factor of the EyepiecesPotential sources of infection Health NotesDioptric Correction Using the Dioptric CorrectionDioptric Correction and Parfocality AdjustingUse GraticulesObjectives Optical Accessories Achromatic objectives Different Types of ObjectivesPlanachromatic objective 1× Achromatic objectives with a long focal lengthBases Control for the size of the aperture/ balance Leica TL5000 Ergo Transmitted Light Base ControlsLeica TL5000 Ergo Transmitted Light Base Operation Switching the transmitted light base onOff Leica TL5000 Ergo Transmitted Light Base Operation Technical Data Leica TL5000 Ergo Transmitted Light Base Power supplyLight source ConnectionsAppendix Example ParameterCalculation example magnification in the binocular tube Warranty benefits Care, Maintenance, Contact PersonsCare Cleaning polymer components Keep accessories in a dust-free place when not in useProtection from dirt Dust and dirt will affect the quality of your results
Top Page Image Contents