Installation of IP Terminals
Important Note
Do not assign any of the following features to operate concurrently across more than 16 DT700 IP terminals.
•Internal Paging
•BGM
•Door phone
Auto Configuration
SV8100 | DHCP | FTP |
Configuration
File
Required equipment:
•IP phone manager
Free software available for download on NEC’s website.
This software will be used to create the config file for the IP terminals.
•FTP server
Free software available on the WEB.
•DHCP Server
This DHCP server has to support the ability to define a “Vendor Class”. The DHCP server must also be able to define “Option Codes”.
Process Overview:
1.Use the AutoConfiguration Application to create a terminal configuration file with corresponding network and telephony data parameters that are needed to connect the DT700 IP Terminal to the Telephony Switch. This created AutoConfiguraiton file needs to be loaded onto a network accessible PC/Server with a FTP server running.
2.Plug the DT700 into the local network (Factory Value Settings).
3.Local DHCP server will provide Vendor Specific Options for the DT700.
4.The DT700 will use DHCP Vendor Specific Options to communicate with local FTP Server.
5.The DT700 will download the created AutoConfig file from the FTP Server.
6.The DT700 will initialize with its new downloaded configuration and connect to the Telephony Switch.
Document No. SIB 244 | Page 28 of 52 | 1st July 2008 |
NEC Australia Pty Ltd shall not be liable for any direct, indirect, consequential or incidental damages about the use of the information included in this document. The information in this technical documentation is advisory in nature and is subject to change. NEC may make improvements and changes in the products described in this documentation without notice. Contents of this document are subject to change without prior notice at the discretion of NEC Australia Pty Ltd. This document has been prepared for use by employees and dealers of NEC Australia Pty Ltd and may not be reproduced without prior written approval of NEC Australia Pty Ltd.