DISPLAY CONTRAST SELECTION
NOTE: This setting is for the base only.
1.Press the flash/program button until “SET CONTRAST” shows in the display. “2” is the default setting.
2.Press 1, 2 or 3 on the base number keypad or use the cid review (up or down arrow) button on the base to scroll to your selection.
3.Press flash/program to store selection.
NOTE: You can press flash/program to go on to the next feature at any time. To exit the menu, press flash/program repeatedly.
LOCAL AREA CODE SELECTION
1.Press the flash/program button until “SET AREA CODE - -
2.Use the handset or base number pad to enter your three digit area code.
3.Press flash/program to store selection.
NOTE: You can press flash/program to go on to the next feature at any time. To exit the menu, press flash/program repeatedly.
To clear the local area code, press and release flash/program, until SET AREA CODE is displayed. Then enter "000." Press flash/program again to confirm.
13