DISPLAY MESSAGES
The following indicators show the status of a message or of the unit.
ERROR | Caller information has been interrupted during transmission |
| or the phone line is excessively noisy. |
ENTER NAME | Prompt telling you to enter the name in one of the 10 |
| memory locations. |
DELETE ALL? | Prompt asking if you want to erase all Caller ID records. |
DELETE CALL ID? | Prompt asking if you want to erase the |
| current Caller ID record that is shown on the display. |
DELETE? | Prompt asking if you want to erase one of the 10 numbers |
| stored in the phone's outgoing memory. |
END OF LIST | Indicates that there is no additional information in Caller ID |
| memory. |
NEW | Indicates call or calls have not been reviewed. |
UNKNOWN CALL | The incoming call is from an area not serviced by Caller ID or |
| the information was not sent |
PAGING | Someone has pressed the page/intercom button on the base |
| or handset. |
BLOCKED NUMBER | The person is calling from a number that has been blocked |
| from transmission. |
REPT | Repeat call message. Indicates that a new call from the same |
| number was received more than once. |
NO DATA | No Caller ID information was received. |
HANDSET SOUND SIGNALS
Signal | Meaning |
A long warbling tone (with ringer on) | Signals an incoming call |
Three short beeps | Page signal |
One short beep (every 7 seconds) | Low battery warning |
|
|
46