3.Press the (mem) memory button again.The display shows ENTER NAME.
4.Use the handset number keypad to enter a name (up to 15 characters). More than one letter is stored in each of the number keys. For example, to enter Bill Smith, press the 2 key twice for the letter B. Press the 4 key 3 times for the letter I. Press the 5 key 3 times for the letter L. Press the 5 key 3 times for the second letter L, and press the 1 key to insert a space between the first and last name. Press the 7 key 4 times for the letter S; press the 6 key once for the letter M; press the 4 key 3 times for the letter I; press the 8 key for the letterT; press the 4 key twice for the letter H.
5.Press the (mem) memory button again to save your selection.The display shows ENTER TEL NUMBR.
6.Use the number keypad to enter the area code followed by the telephone number (up to 24 digits, including pauses) and press the (mem) memory button again to save your selection.The unit beeps to confirm.
7.To enter another name and number in a different memory location, return to step 1 and repeat the process.
STORING A REDIAL NUMBER
1.Make sure the phone is OFF (not inTALK mode).
2.Press the mem (memory) button.
3.Press any number key
4.Press mem (memory) and ENTER NAME shows on the display.
5.Use the handset number pad to enter the name, then press mem (memory) and ENTER TEL NUMBR shows on the display.
6.Press redial/delete to display the redial number and name.
7.Press mem (memory) again to confirm.
NOTE : If the redial number has more than 24 digits, the redial number cannot be stored in memory.
27