Toshiba Strata CT manual Incoming Call Ringing Patterns, To Flash the hookswitch

Before You BeginFeatures

➤ To Flash the hookswitch

➤ While on a call, flash	You hear dial tone after flashing the hookswitch. Some
(press) the hookswitch	telephones may have a special button which flashes the
down about 1/2 second,	hookswitch.
then release it.	Note The hookswitch is located in the handset cradle of your
	telephone.

Some Exchange line features, such as conferencing or behind PBX operation require “flashing the Exchange line,” to then dial the PBX feature access code or extension numbers.

➤To flash an Exchange line

1.Momentarily press the hookswitch for about 1/2 second or press your recall button.

2.Press #45.

3.You can now dial a PBX feature access code or extension number.

After you press the hookswitch or recall, you hear dial tone. This hookflashes the Toshiba system only.

You hear PBX dial tone.

Incoming Call Ringing Patterns

Your telephone ringing pattern is set in system programming.

Some systems may use the internal call ring pattern—one second ON, three seconds OFF—for incoming outside calls.

A distinct outside call ring pattern—0.4 seconds ON, 0.2 seconds OFF, 0.4 seconds ON, three seconds OFF—is available.

2 Strata CT Standard Telephone User Guide November 2001