Features | Tone/Voice First Signalling |
|
|
➤To make a call with a station or system speed dial code
1.Lift the handset.
2.Press # *.
3.Dial a Speed Dial access code.
You hear dial tone.
Dial tone continues.
Dial tone continues while you enter the access code. See Table 4 on page 37. The system automatically dials the telephone number assigned to this code.
Tone/Voice First Signalling
Your Strata CT system may be set for Tone Signalling or Voice First Signalling as the standard internal call signalling method for calls to digital and electronic telephones. The Tone Signal consists of repetitive ring tones, while the Voice First Signal consists of a tone burst followed by the caller’s voice. Standard telephones always ring with Tone Signalling, no matter what the system signalling method. When you initiate a call, you can change to the alternate signalling method.
➤To change the signalling mode
1.Call an internal digital/ electronic telephone.
2.To change the mode, press 1.
If the signalling mode is set for Voice First Signalling, you hear a single tone burst followed by the caller’s voice or sounds from the surrounding area of the called telephone.
If the signalling mode is set for Tone Signalling, you hear repetitive ringback tone.
Ringing stops and you hear a tone burst if you changed from Tone Signalling to Voice First Signalling. You can converse after the tone burst.
The call rings the called station if you changed from Voice First Signalling to Tone Signalling.
Strata CT Standard Telephone User Guide November 2001 | 29 |