Call Park Orbits | Features |
|
|
Call Park Orbits
The Call Park feature enables you to hold a call temporarily in an orbit (the area where the call is held). Anyone can retrieve the call from the orbit using the same or a different station. There are 20 General Park Orbits for the system and 1 Personal Park Orbit for each station.
Once you have parked a call in an orbit, you can:
♦Hang up and retrieve the parked call at a later time
♦Originate another call
♦Access a voice paging device to announce the parked call for pickup from another station
➤To Park a call
1. | While on a call, flash the | You hear dial tone. |
| hookswitch or press your |
|
| recall button. |
|
2. | Press #332. |
|
3. | Enter a General Orbit Number | You hear a one second confirmation tone. The call is |
| (900~919) or [PDN]. | parked at the orbit or to an assigned [PDN]. If an orbit |
|
| number is busy, enter another number. |
4. | Hang up. | Once the call is parked, you can make or receive other |
|
| calls. |
Notes
●If the parked call is not retrieved within a specified time, the call rings back to your phone.
●If your phone is busy when the parked call recalls, you hear two tones of two short beeps, three seconds apart. You can place the new call on hold and answer the parked recall or end the second call and answer the parked recall by hanging up. The parked call remains camped onto your phone until you respond.
14 | Strata CT Standard Telephone User Guide November 2001 |