Toshiba Strata CT manual Remote Call Forward-External Destination Change

Features Call Forward

Remote Call Forward—External Destination Change

If Call Forward-External mode is set at your station, you can change the forwarding destination from a telephone outside of the system.

The destination is normally an external Public Telephone Network Number, but it can also be an internal Directory Number.

➤ To change the destination number

1. Call into the Strata CT	You hear ring back tone signal, then internal dial tone for
system over an Exchange	10 seconds. Try again if you hear busy tone.
line programmed for the	Note See the System Administrator for DISA telephone
DISA feature.
	numbers.
2. After you hear dial tone,	You hear a confirmation tone.
press #670, then enter a	If a number is not dialled, the system automatically causes
[PDN].
	the DISA Exchange line to ring at telephones as a normal
	incoming call. Then, if the call is not answered within 15
	seconds after the ringing starts, it disconnects.
3. Enter the Remote Call	You hear a confirmation tone. See the System
Forward-External security	Administrator for the access code.
code.

Strata CT Standard Telephone User Guide November 2001 11