MaxTech PCI Internal Voice/FAX/Data/Speakerphone Modem user manual Section One Introduction

Page 3

Section One - Introduction

TheMaxTechXPVS56P/CPCIPlugandPlayData, Fax, Voice Speakerphone Modem connects your com- puter to all popular high speed modems available today. The modem utilizes V.90 (56Kbps) technology to provide increased download speeds using regular telephone lines. The modem incorporates Plug and Play for ease of installation.

This manual describes the hardware installation procedures for your new modem. Additional information on AT commands and S-registers is provided so that your system can be customized for a particular operating environment.

*Note: V.90 is capable of downloading at 56Kbps. How- ever, current FCC regulations limit its speeds to 53Kbps.

Section Two - Installation

This section will provide step by step instructions on how to install your new 56 Kbps Data, Fax, Voice, Speakerphonemodem.Installationofthismodemisatwo- step process consisting of: 1) hardware installation and 2) communication software installation.

2.1Unpacking Your Modem

Be certain that you have all the items listed below. This package contains:

• A modem

• A telephone cable

• User's manual

• Software for the modem

•Software user's manual

2.2What You Need You will need:

1.A phillips-head screw driver.

2.A computer running Microsoft Windows 95 or later.

3.An available PCI slot in your PC.

Proceed to Section 2.3 now if you have every- thing required.

1

Page 2 Page 4
Image 3
Page 2 Page 4
Contents 56K BPS Page Proceed to .3 now if you have every- thing required Section Two InstallationSection One Introduction Unpacking Your ModemPCI Expansion Slots Hardware InstallationHardware Wizard Windows 95 Release Hardware ConfigurationNew Hardware Wizard Software Installation and ConfigurationWindows 95 Release 4.00.950 B WindowsUsing Your Modem Testing Your Modem After InstallationCommand Structure Section Three AT Command SetWhere To Go From Here Executing CommandsCommands are echoed Basic AT CommandsCommand Function Bell modeAutomatic rate negotiation Medium speaker volumeInternal speaker on until carrier DetectedExtended AT Commands Ends test in progress Force DSR Signal High onEnable Trellis Coding @ Power on or resetMNP/V.42/V.42bis Commands Fax Class 1 Commands Section Four S Registers ISO 101 Voice Mode CommandsSection Five Result Codes S Registers Register Function Range/units DefaultModem does not respond to commands Section Six TroubleshootingHigh pitch tone is heard whenever you answer the phone Modem does not dialModem dials but does not connect Modem makes a connection but no data appears on your screenFCC Compliance Section Seven Support and ServiceAppendix a Specifications Appendix B NoticesDOC Compliance Information FCC Class B StatementUL Notice
Top Page Image Contents