MaxTech PCI Internal Voice/FAX/Data/Speakerphone Modem Basic AT Commands, Command Function, DS=n

3.3Basic AT Commands

In the following listings, all default settings are printed in bold text.

Command Function

AManually answer incoming call

A/		Repeat last command executed. Do not
		precede A/ with AT or follow with ENTER
AT		Appears at the beginning of every
		command line
B_	B0	CCITTmode
	B1	Bell mode
	B2	V.23 at 1200/75
	B3	V.23 at 75/1200
C_	C0	Carrier always off
	C1	Normal transmit carrier
D_		0 - 9, A-D, # and *
	P	pulse dialing
	R	originate calls in answer mode
	T	touch-tone dialing
	W	wait for second dial tone
	,	pause
	@	wait for five seconds of silence
	!	flash
	;	return to Command Mode after dialing
DS=n		Dial one of the four telephone numbers
		(n=0-3) stored in the modem’s non-
		volatile memory
E_	E0	Commands are not echoed
	E1	Commands are echoed
F_	F0	Enables online echo
	F1	Disables online echo

+++TIES Escape Characters - Switch from Data Mode to Command Mode

H_	H0	Force modem on-hook (hang up)
	H1	Force modem off-hook (make busy)
I_	I0	Display product-identification code
	I1	Factory ROM ID
	I2	Internal memory test
	I3	Device ID
	I4	Reserved

7