GE 25880, 00004228 manual When finished, put the handset back on the cradle to hang up

Page 18

2. When finished, put the handset back on the cradle to hang up.

BASE SPEAKERPHONE

1.Press the speaker/call back button.

2.When finished, press speaker/call back to hang up.

NOTE: For more information, refer to Speakerphone Operation section of this manual.

MAKING A CALL

CORDLESS HANDSET

1.Press the talk/end/call back button. Wait for a dial tone, then dial the desired number.

-Or-

2.Dial the number and then press the talk/end/call back button.

3.When finished, press talk/end/call back or place the handset in charging cradle to hang up.

CORDED HANDSET

1.Lift the handset and wait for a dial tone. Dial the desired number.

-Or-

2.Dial the number, then lift the handset.

3.When finished, put the handset back on the cradle to hang up.

SPEAKERPHONE

1.Press the speaker/call back button. Wait for a dial tone, then dial the desired number.

2.Or, dial the number and then press the speaker/call back button.

3.When finished, press speaker/call back to hang up.

MANUAL CHANNEL SELECTION

While talking, you might need to manually change the channel in order to reduce static caused by baby monitors, garage door openers, or other cordless phones. Press and release the del/chan button on the cordless handset to advance to the next clear channel.

18

Image 18

Contents Page Equipment Approval Information Notification to the Local Telephone CompanyInterference Information LicensingHearing AID Compatibility HAC Table of Contents Changing the Battery Introduction Page Handset and Charge Cradle Layout Base LayoutImportant Installation Information Before YOU BeginInstalling the Handset Battery Installing the Phone Telephone SET UP Language Rings to Answer You may choose from three different ringer tones Local Area Code Basic Operation When finished, put the handset back on the cradle to hang up Call Timer To quickly redial the last number you dialed This feature helps you locate a misplaced handset Mute Speakerphone Operation Make sure the phone is OFF not in Talk mode Receiving AN Incoming Telephone Call During AN Intercom Call Memory Enter NameStoring a Redial Number Dialing a Stored Number Handset Caller ID CID Transferring CID Records to Memory Dialing a Caller ID Number Deleting the Current Caller ID Record Answering System SET UP Answering System Operation Sample Outgoing AnnouncementScreening Calls from the Base Remote Access When the answering system picks up Base LCD shows Remote Access Answering Call Changing the Battery Headset and Belt Clip Operation Display MessagesDELETE? Handset Sound Signals Troubleshooting GuidePage Caller ID Solutions General Product Care Causes of Poor ReceptionIndex Page Service Accessory InformationLimited Warranty For how long after your purchase

Related manuals

Manual 100 pages 24.17 Kb