GE 25880, 00004228 manual Memory, Enter Name

Page 26

2.Press the talk/end/call back button on handset or speaker/call back on base to set up the intercom. Then press the memory/conference button on base or handset to retrieve the external caller. Three-way conversation begins, and CONFERENCE shows in the display.

NOTE: The handset or the base can enter conference directly by pressing talk/call back button on the handset or speaker/call back button on the base while the other party (handset or base) is on the external line.

MEMORY

The cordless handset and base each have their own separate memory storage areas. Store ten 15-character names and 24-digit telephone numbers in the handset memory, and ten 15-character names and 24-digit telephone numbers in the base memory.

STORING A NAME AND NUMBER IN MEMORY

1.Press the memory/conference button on the handset or base.

2.Press the desired memory location button (0 through 9 number keys) or use the caller ID (rev or skip) button on the base or the caller ID/vol (- or +) button on the handset to scroll to the desired location. If the memory location is occupied, the stored name and number displays. If the memory location is unoccupied, EMPTY shows in the display.

3.Press the memory/conference button again. The display shows

ENTER NAME.

4.Use the base or cordless handset touch-tone pad to enter a name (up to 15 characters). More than one letter is stored in each of the number keys. For example, to enter Bill Smith, press the 2 key twice for the letter B. Press the 4 key 3 times for the letter I. Press the 5 key 3 times for the letter L. Press the 5 key 3 times for the second letter L, and press

the 1 key to insert a space between the first and last name. Press the 7 key 4 times for the letter S; press the 6 key once for the letter M; press the 4 key 3 times for the letter I; press the 8 key for the letter T; press the 4 key twice for the letter H.

5.Press the memory/conference button again to save your selection. The display shows ENTER NUMBER.

26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Page Equipment Approval Information Notification to the Local Telephone CompanyHearing AID Compatibility HAC Interference InformationLicensing Table of Contents Changing the Battery Introduction Page Handset and Charge Cradle Layout Base LayoutImportant Installation Information Before YOU BeginInstalling the Handset Battery Installing the Phone Telephone SET UP Language Rings to Answer You may choose from three different ringer tones Local Area Code Basic Operation When finished, put the handset back on the cradle to hang up Call Timer To quickly redial the last number you dialed This feature helps you locate a misplaced handset Mute Speakerphone Operation Make sure the phone is OFF not in Talk mode Receiving AN Incoming Telephone Call During AN Intercom Call Memory Enter NameStoring a Redial Number Dialing a Stored Number Handset Caller ID CID Transferring CID Records to Memory Dialing a Caller ID Number Deleting the Current Caller ID Record Answering System SET UP Answering System Operation Sample Outgoing AnnouncementScreening Calls from the Base Remote Access When the answering system picks up Base LCD shows Remote Access Answering Call Changing the Battery Headset and Belt Clip Operation Display MessagesDELETE? Handset Sound Signals Troubleshooting GuidePage Caller ID Solutions General Product Care Causes of Poor ReceptionIndex Page Service Accessory InformationLimited Warranty For how long after your purchase
Related manuals
Manual 100 pages 24.17 Kb
Top Page Image Contents