GE 00004228, 25880 manual Storing a Redial Number

NOTE: If you make a mistake, press the delete button on the base or del/chan on the handset to backspace and erase the wrong character(s) or number(s).

6.Use the touch-tone pad to enter the area code followed by the telephone number (up to 24 digits, including pauses) and press the memory/ conference button again to save your selection. The unit beeps to confirm.

7.To enter another name and number in a different memory location, return to step 1 and repeat the process.

STORING A REDIAL NUMBER

1.Make sure the phone is OFF (not in TALK mode).

2.Repeat step 1 through 6 in Storing a Name and Number in Memory.

3.Press redial to display the redial number and name.

4.Press memory/conference again to confirm.

NOTE : If the number you want to redial has more than 24 digits, the telephone number cannot be stored in memory.

INSERTING A PAUSE IN THE DIALING SEQUENCE

Press the #pause button on the touch-tone pad twice to insert a delay in the dialing sequence of a stored telephone number when a pause is needed to wait for a dial tone (for example, after you dial 9 for an outside line, or wait for a computer access tone.) Each pause counts as 1 digit in the dialing sequence.

REVIEWING, CHANGING OR DELETING STORED NAMES/NUMBERS

To Review: Press memory/conference on the handset or on base, then press the caller ID (rev or skip) button (on base) or the caller ID/vol (- or +) button (on cordless handset) to scroll through the stored numbers. Or press the memory location number.

To Change: Follow the steps under Storing a Name and Number in Memory except replace the stored name or number with the new information.

To Delete: Press memory/conference on the handset or on base, then press the caller ID (rev or skip) button (on base) or the caller ID/vol (- or +) button (on cordless handset) to scroll to a desired memory.

27