Lucent Technologies MLX-20L, MLX-10D Saved Number Dial, Special Characters, System Speed Dial

Page 20

Often-Used Features

Saved Number Dial

Must be programmed on a button. To program:

See Programming Buttons & Settings, p. 20.

Use this feature to redial a busy or unavailable number that you want to try later.

To use:

1.Before hanging up, press the programmed Saved Number Dial button.

2.Press the same type of button used to place the call (for example, ICOM, Pool, or SA).

3.To redial, press the programmed Saved Number Dial button.

Special Characters

Features that dial numbers automatically may need special characters to allow for correct dialing or system response.

Press...

See...

Means...

Drop

s

Stop. Halts dialing

 

 

sequence to allow for

 

 

system response.

Hold

p

Pause. Inserts 1.5-sec

 

 

pause in dial sequence.

 

 

Multiple consecutive

 

 

pauses allowed.

Conf

f

Flash. Sends

 

 

switchhook flash. Must

 

 

be first entry in

 

 

sequence.

### For Extension Programming only (Ext Program [Prog]): End of Dialing. Use to signal end of dialing sequence or to separate grouped digits.

## For dialing and Directory listings: End of Dialing. Use to signal end of dialing sequence or to separate grouped digits.

System Speed Dial

To program:

See Programming Buttons & Settings, p. 20.

You can program 3-digitSystem Speed Dial codes on a button. These are the same numbers that are available from the System Directory (p. 14). Dial these directly by pressing the Feature button and dialing the code (600–729).

Voice Announce

To program:

See Programming Buttons & Settings, p. 20.

Make voice-announced calls from ICOM Voice or SA Voice buttons on your phone (see Line Buttons, p. 2) or use Paging (p. 16). The Voice Announce feature allows you to prevent voice announcements and paging calls from interrupting you. Instead, the calls ring. Voice Announce is a setting that you can turn on or off without programming a button for it. If you have a data station at your extension and Voice Announce on, you should turn Voice Announce off.

18

Image 20
Contents Contents Page Feature Your Merlin Legend MLX Display TelephoneHome User Card TrayUnderstanding Your Telephone Line ButtonsTones RingsFeature Finder See Alarm Clock & Timer, p See Forward & Follow Me, pSee Park & Pickup, p See Do Not Disturb, pHeadsets Headset FeaturesSee Programming Buttons & Settings, p HeadpiecesCall Handling Making & Answering CallsTransfer HoldMessaging Leaving MessagesReceiving Messages Press the Leave Message button you have programmedSignaling & Notify Posting MessagesUsing Features Display-Only FeaturesOther Features Feature CodesAccount Codes Often-Used FeaturesAlarm Clock & Timer Authorization Codes Auto DialCamp-On Callback & Line RequestCall Waiting You can also program buttons for these Coverage features Press the Feature button and select Direct VM DrcVM or dialCoverage Direct Voice MailPersonal Directory Often-Used Features DirectoriesExtension & System Directory Forward & Follow Me Do Not DisturbLast Number Dial Park & Pickup Night ServicePaging Pickup Personal Speed DialPrivacy Saved Number Dial Special CharactersSystem Speed Dial Voice AnnounceDisplay Reference Code Programming Programming Buttons & SettingsDisplay Programming Programming Codes Allowed
Related manuals
Manual 24 pages 36.43 Kb Manual 24 pages 52.86 Kb