Lucent Technologies MLA-28D Programming Buttons & Settings, Display Programming, Code Programming

Display Reference

	2-Line Display		2-Line Display
Feature Name	Abbreviation	Feature Name	Abbreviation
Account Code Entry	Acct	Notify	Ntfy
Alarm Clock	AlClk	notify receive	Recv
Authorization Code Entry	Auth	notify send	Send
Auto Dial	AutoD	Paging
inside (extension)	In	group paging	GrpPg
outside	Out	loudspeaker paging	LdsPg
Callback	CbckS	Park	Park
Call Waiting	CWait	Personalized Ring	PRing
Camp-On	Camp	Pickup	Pkup
Conference	Conf	general	Genrl
Contrast	Ctrst	group pickup	PkupG
Coverage	Cover	inside (extension)	Ext
Coverage VMS	CvVMS	outside (line)	Line
group	Group	Privacy	Prvcy
primary individual	Prmry	Recall	Recll
secondary individual	Secnd	Reminder	Rmind
inside only	CvIns	cancel	Cancl
off	CvOff	set	Set
Directory	Dir	Ringing Options	RngOp
extension	ExtDir	all lines	AllLn
personal	–	one line	1Line
system	SysDir	delayed ring	Delay
Direct Voice Mail	DrcVM	immediate ring	Immed
Do Not Disturb	DND	no ring	No
Drop	Drop	abbreviated ring	Abbrv
Extension Programming	Prog	Send Ring	SnRg
Follow Me	FlwMe	Saved Number Dial	Save#
Forward	Forwd	Signaling	Signl
Group Calling	GrpCl	System Speed Dial	SpdDl
Headset/Handset	Hdset	Timer	Timer
Headset Auto Answer	Auto	Transfer	Trans
Headset/Handset Mute	Mute	Voice Announce	Voice
Headset Status	Stat	place calls	Place
Last Number Dial	Last#	receive calls	Recv
Messaging	Msgs	ringing calls	Ring
delete message	Dlete	voice-announced calls	Voice
leave message	LvMsg
return call	Call
next message	Next
posted message	Post

Programming Buttons & Settings

If you use a feature often, you can program it onto an unused line button for easy access. If you use a feature occasionally, see Using Features, p. 9. Keep these facts in mind when setting up your telephone:

•Some features must be programmed on a button or they can’t be used. (These features are marked with a ◆ on the Programming Codes list.)

•Other features (marked with • on the Programming Codes list) are settings that affect the way your phone works. Some settings, such as Personalized Ring, affect all the lines on your phone. During programming, you still have to select a line button, but it can be any line button the feature affects. Others, such as Delay Ring for a single line, are settings that affect a specific line and require you to press it during programming (these features are noted on the Programming Codes list). Settings remain active until you program them again.

To see whether a feature is programmed on a line button, press the Inspct button and then the line button. Read the display and press the Home button to exit.

While programming, either make a selection from the display (press the button next to or below the item) or use codes. Using codes takes fewer steps, but requires the Programming Codes list. As you program, your phone beeps.

Display Programming

To program using the display:		5.	Select ListFeature [List] and search for the
			feature name. If you see > on the screen,
1.	If programming a feature on a button, label
			press the More button to see more feature
	the button.
			names. (Consult the Display Reference
2.	Press the Menu button and select Ext
			if you need help with abbreviations.)
	Program [Prog].	6.	Select the feature. If additional numbers
3.	Select Start.
			(such as an extension number) are needed,
4.	Press the line button you are programming.		dial them.
	If a feature is already programmed, its name	7.	Press Enter to finish programming. If you
	appears on the display. If you are program-		wish to program another button, begin
	ming a setting, either press the line button		again with Step 4. (Label the buttons first.)
	affected or press any line button.	8.	Press the Home button to exit at any time.

Code Programming

To program using programming codes:	4. Select the code from Programming
	Codes list and dial it. If additional numbers
1. If programming a feature on a button, label
	(such as an extension number) are needed,
the button.
	dial them, too.
2. Press the Feature button and dial 00.
	5. Press Enter to finish programming. If you
3. Press the line button you are programming.
	wish to program another button, begin again
If a feature is already programmed, its name	with Step 3. (Label the buttons first.)
appears on the display. If you are program-	6. To exit, press the Feature button and dial
ming a setting, either press the line button
	✻00.
affected or press any line button.

20