Troubleshooting
Troubleshooting
When an error occurs in the operation of the Remote Module, you should check for malfunctions in an organized manner. Follow these steps when troubleshooting the Remote Module:
1.Verify that the programmed telephone number is correct.
2.Check all interconnecting cables to ensure that they are properly seated.
3.Verify that the DIP switches are set correctly.
4.Check the circuits to ensure that they are free of noise and meet the specifications listed in Chapter 1, Introduction.
5.Verify that the power LEDs are illuminated.
6.If you cannot locate the source of the problem, contact your system administrator and describe the problem.