System Features, Using Dial By Name | LG Electronics 20A, 20W

●aria 20 SERIES DIGITAL KEY TELEPHONE SYSTEM USER GUIDE: aria 20A, aria 20, aria 20W

Wake-up Call

The system automatically sends ring signal to a station which registers a wake-up time. There are two kinds of wake-up call, one is effective for one-day, the other is effective until canceled.

Button

Procedures

Range

To register wake-up time,

Press TRANS/PGM button.

Dial 4 1 and 4-digit wake-up time (HHMM) in 24-hour mode.

Press HOLD/SAVE button for “one-day” or dial # and

HOLD/SAVE button for “until canceled”. (Confirmation tone is heard.)

To cancel wake-up call,

Press TRANS/PGM button and dial 4 2.

Press HOLD/SAVE button. (Confirmation tone is heard.)

Using Dial By Name

Each station and speed dial number can be assigned to a name. When names are programmed, you may select a speed dial number by the stored name.

Button

Procedures

Range

Press SPEED button twice.

On the display, you will see the following. Select desired type.

1 : Intercom

2 : User (Station Speed Dial)

3 : System (System Speed Dial) Confirmation tone is heard and you will

see the following:

DIAL BY NAME

ICM : 1 U_SPD : 2 S_SPD : 3

1 : XXXX XXXX XXXXXX

2 : YYYY YYYY YYYYYY

Press the VOLUME button to see the next two names.

You may enter characters using the code in “Storing Dial by Name”. The LCD will display the first two names which match your input.

To select the name in line 1, press HOLD/SAVE button.

To select the name in line 2, dial 2 and press HOLD/SAVE button. The call is placed automatically.

LCD Language Change

Button	Procedures	Range
	Press TRANS/PGM button and dial 5 1 .	Available by
	The language in LCD is changed into default value.	Software:
	If pressing TRANS/PGM + 5 1, the language in the LCD is changed to the nation’s	16: Above V4.0
	language.	20W: Above V3.0

Alarm Reset

Button	Procedures	Range
	To terminate alarm signal while idle state,
	Dial 6 5
	Confirmation tone is heard and the alarm signal is terminated at all assigned stations.

Two-way Recording

While a CO line call, you can record the conversation and it will be saved in its own mailbox.

Button	Procedures		Range
	To record the conversation,
	Press the programmed {RECORD} button.
	To program the {RECORD} button,
	[TRANS/PGM] + Flex. BTN + [TRANS/PGM] + # 4 + [HOLD/SAVE]

	To finish the recording,
	Press the programmed {RECORD} button again. Or, replace	the handset.