●aria 20 SERIES DIGITAL KEY TELEPHONE SYSTEM USER GUIDE: aria 20A, aria 20, aria 20W
To Set Current Time 1 Hour Early/Late
Button | Procedure |
| |
To set the current time 1 hour early, | |
Press TRANS/PGM button. | |
Dial | * 1. |
To set the current time 1 hour late,
Press TRANS/PGM button.
Dial * 2.
System Speed Dial
A group of speed dial numbers can be stored within the system for access by allowed stations. These numbers provide speedy access to often used outgoing CO dialing numbers.
Button | Procedure |
To store system speed numbers,
Press TRANS/PGM button.
Dial SPEED button.
Dial speed number bin.
Dial the phone numbers to be stored.
Dial HOLD/SAVE button.
Or, speed dial by line number:
Press TRANS/PGM button.
Dial SPEED button.
Dial speed number bin.
Press desired outside line button.
Dial the phone numbers to be stored.
Dial HOLD/SAVE button.
To use system speed numbers,
Press SPEED button.
Dial speed number bin.
Attendant Intrusion
Attendant may intrude into any station which is in conversation with a CO line.
Button | Procedure |
20/16/20W : 21~99
20/16/20W : 21~99
Attendant Operation
To activate attendant intrusion
Press CO button you wish to converse. (If intrusion is allowed by Admin program, then 3 way conversation is set up. If intrusion is not allowed, busy tone will be heard.)
Requires Installer Programming Settings.
Day/Night Mode Service
The attendant station can be placed into night service mode allowing ring assignments and answering privileges to station not having the privileges in the day mode. In aria 20/16/20W,Day/Night mode change is available by pressing DND button at attendant station.
Button | Procedures |
To activate/deactivate Day/Night/On-demand mode manually,
Press DND/FWD button at attendant station.
Then, DND/FWD button is flashing. (The system is in
If pressing the DND button one more, then the system is in Night service mode.
Auto Ring Mode Service
The system can be placed in Day/Night/Auto Ring mode operation manually by pressing [DND/FWD] button at attendant station. In Auto ring mode, the ring mode will follow the Weekly Time Table in Installer Programming. Available for ver 4.0(aria 16) and 3.0(aria 20W), all aria 20
Button | Procedures |
| To activate/deactivate Day/Night/Auto Ring mode manually, |
| Pressing DND/FWD button, the ring mode is changed to Night → Auto Ring → Day mode in sequence. |
| To activate Auto ring mode with Attendant PGM mode, |
| The Weekly Time Table should be entered by Admin Programming |
18