LG Electronics HBM-520 user manual Summary of button functions, Function, Action, Multipoint

How to use

Call waiting*

-Answer a second call without hanging up the first call by pressing the CALL button for 1second. Press the CALL button for 1second to return to the original call.

-Briefly press the CALL button to terminate the active call or both calls at once. (subject to handset's support)

Call Reject*

-Activate Call Reject by pressing the CALL button for 1second when the handset rings.

* It is possible to use these functions only when your handset supports them. For further information about using these features, please consult your handset's user manual.

Multipoint

The LG HBM-520 is capable of having two handsets connected to the Headset at the same time. This will give you the freedom of having only

How to use

Ear Loop Attachment and Removal

Attaching the ear loop

-Hold the ear loop just above the base (C shaped part), and snap it into place behind the speaker on the HBM-520.

Removing the ear loop

-Hold the ear loop at the base (C shaped part), and pull, to unhook the ear loop from the HBM-520.

Note: The ear loop can be attached to the HBM-520, as an option, if necessary. Not every user will need to attach the ear loop.

Summary of button functions

one Headset to operate both your handsets.

Multipoint Connect

-Pair the Headset with one of your Bluetooth-enabled handsets. (per the pairing instructions on pages 5-6).

-Turn off the Headset.

-With the power off, press and hold the PWR button on the HBM-520 for 5 seconds to enter Manual Pairing mode.

-Now, pair and connect the Headset with your other Bluetooth-enabled handset. (This will be your Primary handset).

-Once this handset is paired and connected, go back and connect the first paired handset to Headset. (This will be your Secondary handset).

*Note: When the HBM-520 is connected to two handsets at the same time (Multipoint), the Headset calling functions will work with the most recently used handset.

Calling Function

-Voice Dial and Last Number Redial features work with the Primary handset. (most recently used handset).

-The first connected device is set as primary handset and the next connected device is set as secondary handset.

-The device which made the last outgoing call will always be set as the primary handset.

-To answer an incoming call on your secondary handset, while on a call on your primary handset, hang-up the active-call (briefly press the CALL button) and then answer the incoming-call (briefly press the CALL

button again).

Function

Power on

Power off

Volume up

Volume down Transferring a call

Answering a call Ending a call Call waiting

Last number redial Voice dialing

(handset must support)

Manual pairing

Call reject

HBM-520	Action
Status
Power off	Press the PWR button for 3 seconds.
Power on	Press the PWR button for at least
	4 seconds.
Talking	Briefly press the Volume Up button.
Talking	Briefly press the Volume Down button.
Talking	- Handset to Headset
	Briefly press the CALL button on the
	HBM-520(Headset and handset must
	be paired)
	- Headset to handset
	Press and hold the VOLUME UP button
	on the HBM-520 for 5 seconds.
Ringing	Briefly press the CALL button.
Talking	Briefly press the CALL button.
Talking	Press the CALL button for 1 second.
Idle	Press the CALL button for 1 second.
Idle	Briefly press the CALL button.
Power off	Press the PWR button for 5 seconds.
Ringing	Press the CALL button for 1 second.

8

9