Controlling another participant’s camera

Using in-conference features

Selecting participants using ConferenceMe

When using ConferenceMe you can scroll through participants in the same way as you would using a hardware endpoint.

Use the Left/Right keys on your keyboard to scroll through participants. Alternatively, you can select Next participant from the right-click menu.

Selecting participants using Movi

When using Movi you can use the DTMF keypad to scroll through participants. Use the 4/6 keys on the keypad to scroll through participants.

During a conference, you might need to change the camera settings for one of the conference participants. To do this, use FECC or DTMF tones.

1Enable FECC or DTMF tones, depending on your video endpoint.

2Select the participant whose camera you want to control. Refer to Selecting participants earlier in this document.

3Press zoom in (or 1 if using DTMF tones) to enter the mode which passes the navigation and zoom controls through to the participant's camera.

4Use FECC or DTMF tones to control the participant’s camera.

5To stop controlling the participant’s camera, wait five seconds.

The table below describes the icons that appear on-screen.

IconMeaning

You are now controlling the far-end video camera

You are moving the far-end video camera to the left or right. (If you are using the numeric keypad to navigate, use 4 for left and 6 for right)

You are moving the far-end video camera up and down.

(If you are using the numeric keypad to navigate, use 2 for up and 8 for down)