Cisco Systems 14523.02 manual

Page 13

Using in-conference features

If you are using DTMF tones, press 6. The endpoint can be unmuted by pressing 6 again

There are two ways of muting ConferenceMe. Either by right-clicking and selecting Mute outgoing audio, or by clicking the mute icon on the toolbar.

13

Image 13

Contents Cisco TelePresence MCU Accessing ConferencesGetting started 14523.02Contents Introduction IntroductionDialing in using a software video endpoint Dialing in using a hardware video endpointCalling in to conferences The conference welcome message Dialing in using an audio-only telephoneCalling an auto attendant Using an auto attendantNavigating the auto attendant menu Navigating the auto attendant using DTMF Joining a conferenceCreating a new conference Accessing other auto attendant menusLeaving a conference Returning to the auto attendantControlling conference views Using in-conference featuresSelecting participants Controlling another participant’s camera Muting your endpoint The zoom out menu If you are using DTMF tones, press *6. The endpoint can be unmuted by pressing *6 again Understanding in-conference status icons Disclaimers and notices Disclaimers and notices