Cisco Systems 14523.02 manual Contents

Page 2

Contents
Introduction	3
Calling in to conferences	4
Dialing in using a hardware video endpoint	4
Dialing in using a software video endpoint	4
Dialing in using an audio-only telephone	5
The conference welcome message	5
Using an auto attendant	6
Calling an auto attendant	6
Navigating the auto attendant menu	6
Joining a conference	7
Creating a new conference	8
Accessing other auto attendant menus	8
Leaving a conference	8
Using in-conference features	9
Controlling conference views	9
Selecting participants	10
Controlling another participant’s camera	11
The zoom out menu	12
Muting your endpoint	12
Understanding in-conference status icons	14
Disclaimers and notices	15

2

Image 2

Contents Getting started Accessing ConferencesCisco TelePresence MCU 14523.02Contents Introduction IntroductionCalling in to conferences Dialing in using a hardware video endpointDialing in using a software video endpoint Dialing in using an audio-only telephone The conference welcome messageNavigating the auto attendant menu Using an auto attendantCalling an auto attendant Joining a conference Navigating the auto attendant using DTMFLeaving a conference Accessing other auto attendant menusCreating a new conference Returning to the auto attendantUsing in-conference features Controlling conference viewsSelecting participants Controlling another participant’s camera The zoom out menu Muting your endpoint If you are using DTMF tones, press *6. The endpoint can be unmuted by pressing *6 again Understanding in-conference status icons Disclaimers and notices Disclaimers and notices