EN
CALL TIMER
While you are talking on the speakerphone, the total talk time is displayed on the center of the bottom line of the display.
ANSWERING SYSTEM OPERATION
This section discusses the buttons and features on the answering machine.
VOICE INSTRUCTIONS
If you need additional assistance, press the REVIEW
RECORDING THE OUTGOING ANNOUNCEMENT
For best results when recording, you should be about 9 inches from the microphone, and eliminate as much background noise as possible.
1.Make sure the Charge unit’s clock is displayed.
2.Press and hold the announce button. Hold the button down until you finish the announcement.
3.Begin talking after you hear the beep.
4.Release the button after you finish your announcement.
5.If you choose not to record an outgoing announcement, a default announcement will play. To return to the default announcement after you have recorded your own outgoing announcement, press the announce button to play your personal outgoing announcement, press the erase button to delete it.
Sample Outgoing Announcement
Hi, this is (use your name here), I can’t answer the phone right now, so please leave your name, number and a brief message after the tone, and I’ll get back to you. Thanks.
REVIEWING ANNOUNCEMENT
•Press and release the announce button to play your outgoing announcement.
MESSAGES INDICATOR
The Charge display shows you how many total messages you have. The message indicator flashes to indicate you have new messages.
SCREENIING CALLS FROM THE CHARGE UNIT
You can screen incoming calls by waiting for the caller to begin leaving a message (to hear who it is), then pick up the handset and press the TALK/CALLBACK or speaker button on the Spacemaker® to talk to the caller. The answering machine automatically stops recording when you activate the handset or pick up an extension phone.
25
28 | 5/6/2005, 10:32 AM |