Vertical Communications DSU II manual To store an intercom number as a speed dial number

Page 12

Making Calls

•To dial system speed dial numbers (if all lines in the line group used for the preselect are busy)

1.Lift the handset and listen for intercom dial tone.

2.Dial a different line group access code than the one used for the preselect and listen for outside dial tone.

3.FLASH the hookswitch -and- dial *01*

4.Dial the desired speed dial bin. Depending on how your system is configured, the speed dial bin code can have the following range: Contact your system administrator to determine which range is active.

d)For systems setup with 500 storage locations, the range is 100-599

e)For systems setup with 1000 storage locations, the range is 000-999.

f)For systems setup with 2000 storage locations, the range is 0000-1999.

• To store an intercom number as a speed dial number

1.Lift handset and listen for intercom dial tone.

2.Dial * * 1.

3.Press the button you want to program (1–0).

4.Press 8 to preselect intercom.

5.Dial the intercom number or feature code you want to store (up to 16 digits that can include # and *).

6.Hang up handset.

7.Repeat procedure for each speed dial number.

)You cannot program pauses or hookflashes with intercom

speed dial numbers, and the system will not accept *#0* or *#746* as programming entries.

8

Comdial

September, 02

Image 12

Contents Industry Standard Telephone IST Station User’s Guide Page Transferring Outside Calls Making a Paging Announcement Flashing the Hookswitch IntroductionUsing Call Pickup Using Night ModeAnswering Calls Answering a CallUsing Prime Line Preference Using Prime IntercomTo access an intercom line Making CallsTo access outside line using line group feature Line Group Access CodesTo cancel queuing To queue for a busy line group Using Last Number Redial To redial the last number that you dialed at your telephoneUsing Speed Dialing To program personal speed dial numbersTo dial personal speed dial numbers To dial system speed dial numbersTo store an intercom number as a speed dial number Holding Calls Using Call Park Hold Recall FeatureTo park a call To retrieve a parked callUsing Screened Transfer Using Unscreened TransferTransferring Outside Calls To do a quick unscreened transfer to intercom or tie line If station is busy or the user does not answerConferencing Stations To conference between yourself and two outside partiesUsing Broker’s Call Using the Messaging Feature Using Message Waiting ControlTo retrieve a message at an alerted station Using LCD Messaging To turn LCD messaging onTo turn LCD messaging off Using RECALL/FLASH Using External Paging Using All-Call and Zone PagingMaking a Paging Announcement To page over an external public address systemUsing Meet-Me To reply to a meet-meForwarding Calls To cancel call forwarding Call Forward Outside System CfosTo activate Cfos for an IST telephone To De-Activate Cfos Using the Tracker Paging System To track a called party after receiving a ring-no answerTo track a called party without first calling them To retrieve a call that you parked using the Tracker option Responding To Tracker Pager CallsIf you receive a parked call message on your Tracker pager To disable or enable a Tracker pager at your station To cancel the camp-on activity at any time Camping on AT a StationCamping On To An Idle Station To cancel automatic callback before camp recall occurs Camping On To a Busy StationTo camp on at any busy station To answer callback ringTo activate call waiting when you hear a busy signal Initiate Call Waiting At a Busy StationTo camp on at a station with a Do Not Disturb condition set To cancel call waiting Line Call WaitingTo answer a call-waiting tone Camping On At a Station Quick Reference Guide Quick Reference Guide Account Code All-Call PagingAttendant Automatic CallbackAutomatic Route Selection ARS Broker’s CallCall Forward Call Forward Outside System CfosClass of Service COS Programming Direct Inward System Access DisaCall Transfer Caller IDHookswitch Direct Inward Dialing didDo-Not-Disturb Dual Tone Multiple Frequency DtmfIndustry Standard Telephone IST IntercomKeypad Last Number RedialingLine Queuing Meet-Me AnswerMessaging Night TransferPulse/Tone Switching PagingPrime Line PrivacyService Observing Ringing Line PreferenceSaved Number Redialing Screened Call TransferStation Message Detail Accounting Smda System Speed DialTAP Flash/Recall Toll RestrictionUnscreened Call Transfer Unsupervised ConferenceZone Paging September Comdial Index-1 Index-2 Comdial September